Mitsubishi Electronics SERIES 742 Allow it to cool for at least, One hour before attempting to

Page 42

42 Appendices

Appendix A: TV Care

Lamp-Cartridge Replacement

 

 

 

 

 

 

CAUTION: If the television

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

 

 

is on, press POWER to turn

 

 

 

 

it off. Unplug the television

 

 

 

 

 

 

 

 

 

 

 

 

BURN DANGER! HOT SURFACES INSIDE!

and allow it to cool for at least

one hour before attempting to

Touch lamp cartridge handle only. Do not touch lamp or lamp car-

tridge housing. Keep lamp cartridge horizontal during removal. Do

replace the lamp cartridge.

not tilt as glass may come out and cause injury. Replace lamp car-

 

 

 

 

tridge only with the same part number 915B455012.

Lamp

 

 

 

 

 

 

 

The light source for this television is a

 

 

 

 

 

 

 

 

 

 

 

 

lamp, which is part of a lamp cartridge

 

 

 

 

 

 

assembly. The life of the lamp can vary, based on the lamp itself, the air

WARNING

temperature around the TV while it is operating, the selected lamp mode, and

your viewing patterns. Warmer air or poor ventilation shorten the lamp life,

THE ACCESS PANEL IS

PROVIDED WITH AN INTERLOCK

as does setting Lamp Energy to Bright and turning the television on and off

TO REDUCE THE RISK OF

frequently.

 

 

 

 

EXCESSIVE ULTRAVIOLET

Mitsubishi warrants the lamp for one (1) year from the date of original

RADIATION. DO NOT DEFEAT

TV purchase at retail.

 

 

 

 

ITS PURPOSE OR ATTEMPT TO

The lamp cartridge assembly is designed to be replaced by the TV

SERVICE WITHOUT REMOVING

owner. The cost of labor for a service technician to replace the lamp

PANEL COMPLETELY.

is not covered by the warranty.

 

 

 

 

 

 

Ordering a New Lamp

To Receive a Replacement Lamp Cartridge Assembly Under Warranty

Visit our website at www.mitsuparts.com.

Call (800) 553-7278. Please have model number, serial number, and TV purchase date available.

To Purchase a Replacement Lamp Cartridge Assembly After Warranty

Visit our website at www.mitsuparts.com or call (800) 553-7278. Order the following:

Lamp Part Number 915B455012

Lamp-Substitution Alert

MEVSA recommends that you use only genuine Replacement Lamp Assemblies purchased directly from Mitsubishi or a Mitsubishi Authorized Dealer or Mitsubishi Authorized Service Center. MEVSA advises that replacement lamps obtained separately from the Lamp Cartridge and/or Lamp Assemblies obtained from unauthorized sellers may be incorrect for your television, may not fit or perform properly and may even damage your television. MEVSA can not be responsible for the performance, reliability or safety of any replacement lamps that are obtained from unauthorized sources.

WARNING

Do not remove the lamp cartridge immediately after turning off the television. You may get burned because the lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.

Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.

Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.

Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electri- cal shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for service.

Install the lamp cartridge securely. Failure to do so may cause a fire.

Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.

THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR DIS-

Hg = MERCURY POSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recycling infor- mation, please contact your local authorities or the Electronic Industries Alliance at www.eiae.org

For assistance call 1(800) 332-2119

Image 42
Contents Series FCC Declaration of Conformity Contents Lamp Replacement To Order a Replacement Lamp Under WarrantyChildren and TV Viewing Replacement Parts Outdoor Antenna GroundingViewing or Changing the Sleep Timer Sleep TimerSetting the Sleep Timer FAV FavoritesEffect of Mitsubishi Formats on Picture Types Picture Shape and Display FormatsFormat Definitions DVD Image DefinitionsSignal Definitions Status DisplayAbout Channel Numbers HDMI-4 offered More On TV Inputs and OutputsHdmi Inputs High-Definition Multimedia Interface On the 842 seriesComposite Video USB-P Power OnlyUSB LANHdmi Connection Connecting a Computer to the TVSignals DVI Video ConnectionPhotos and Motion Video as Composite Video Using the TV with an Audio-Only DeviceSpecialized TV Connections TV jack panel Audio cablesTip Computer Video AdjustmentsImage Resolution Distortion in Computer ImagesAdding a Subwoofer Wireless SubwooferSupplemental Audio Connections 842 series Subwoofer with Audio CableTransmitter External Rear SpeakersRight audio inputs Set Sound Global Analog Audio Out to RearOutput Using the TV Speakers as a Center ChannelHdmi cable Surround sound Source deviceStreamTV Internet Home Network SetupWired Ethernet Connection About StreamTVUsing StreamTV Internet Media TroubleshootingWireless Connection Remote PC VNC Initial SetupWireless Adapter Keyboard Mouse Getting started with Remote PC VNC20 1. Additional TV Features Using Remote PC VNC Apps Keys for Remote PC applicationsMain Menu PicturePicture Reset Picture Perfect Picture AdvancedPicture 3D Mode Sound Sound AudioSAP Sound Global Sound Auto SPSound SoundPro Captions Setup Clock SetupSetup Language Setup TimerAnt Air, Ant Cable Setup ChannelAdding/Deleting Channels Using the Channel Edit Menu EnterSetup Energy Setup NetworkInputs Inputs NameGo to Inputs Name Inputs StreamTV Inputs UpdateHdmi Inputs Control Inputs Order Inputs DemoPass Code LockTV Locks Parental MenuUsing TV Locks Tips for Using the Lock MenuBypassing TV Locks Lock Parental TV-YLock Panel Lock TimeLock Channel Lock OtherHdmi cable cannot support CEC Action Enabling Hdmi Control CEC DevicesHas No Hdmi Control Option Device does not have CEC compatibility ActionCable OptionalHdmi output HDMI, you can use anyRemoving an Hdmi Device Using Hdmi ControlResolving CEC Conflicts Turning Off the TV’s Hdmi Control of a CEC DeviceCare of the Remote Control Installing the Remote Control BatteriesCleaning Recommendations Appendix a TV CareReplace the lamp cartridge Allow it to cool for at leastOne hour before attempting to Lamp Part Number 915B455012Installing the New Lamp Cartridge Use only replacement lamp part number 915B455012Replacement Procedure Removing the Old Lamp CartridgeMode menu Appendix B TroubleshootingService and Customer Support ServiceTV Channels Symptom Remarks TV Power On/Off Symptom Remarks Picture Symptom RemarksChange Lamp Energy from Standard to Bright Sound Symptom Remarks Stream TV-VNC Problems Symptom RemarksCheck that Digital Audio Output and/or AVR Audio Output Trademark and License Information Mitsubishi TV Software Mitsubishi TV SoftwareGNU General Public License Conveying Verbatim Copies Acceptance Not Required for Having Copies GNU General Public License No Warranty Version 2.1, February PreambleFor assistance call 1800 Mitsubishi Home-Cinema Television Limited Warranty Warranty Internet Access Required for Third Party Services Updates Availability of Content on Third Party ServicesThird Party Services Content Disclaimer Index Page System Reset Lamp-Substitution AlertTVsupport@mevsa.com