Mitsubishi Electronics SERIES 742 manual Sound Audio, Sap

262. TV Menus

Sound

Sound Audio

Settings in this menu are saved for the current input only with the exception of Balance and

TV Speakers, which applies to all inputs. Pressto make changes and then press MENU to return to the menu screen.

To make Audio adjustments while watching TV and without using the menu:

1.Press the AUDIO key.

2.Pressto select an audio option.

3.Pressto change the setting.

TV Speakers	On	Turns on the internal TV speakers.
	Off	Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.
		Note: When you disconnect an A/V receiver, be sure to change the Sound setting
		to TV to hear sound from the TV speakers.
	Center	842 Series. Makes the TV’s speaker array act as a center channel. See “Using the
		TV Speakers as a Center Channel,” page 16.
		Notes:
		• When Center is active, the subwoofer output is muted even if set to On.
		• To de-activate the center channel, change TV Speakers to On or Off.
Center	[Center channel	842 Series. Adjusts the volume level of the TV speaker array when used as a
	level adjustment]	center channel.
		Note: Set TV Speakers to Center to make this adjustment available.

Bass	Controls volume of low-pitched sound from the TV speakers.
Subwoofer
	[Subwoofer level	842 Series. Adjusts the volume level of a connected subwoofer.
	adjustment]	Note: Set Sound > Global > Subwoofer to On to make this adjustment available.
Treble	Controls volume of high-pitched sound from the TV speakers.
Balance
	Controls audio balance between the right and left TV speakers.
Sound Mode	Stereo	No special audio effects from the TV speakers.
	Surround	Modifies audio from the TV speakers.
		• For monaural (non-stereo) programs, creates a simulated stereo effect.
		• For stereo programs, creates a simulated surround sound effect.
		• The TV’s speaker array plays surround sound if available.
	Music	842 Series. Optimizes the TV’s speaker array for music listening.
	Night	842 Series. Focuses the TV’s speaker array to a single point to limit sound heard by
		others outside the room. Press ENTER to adjust the focal point (Night Angle).
Level Sound	On, Off	Reduces differences in sound volume between programming segments, such as the
		difference between regular broadcast programs and commercial segments.
Listen To	Stereo	The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
(applies only		Stereo is displayed when you tune to a channel broadcasting in stereo.
to analog
	Mono	Reduces background noise. Use when receiving a weak stereo audio signal. All
channels from
		audio is played as mono.
the ANT input)
	SAP	Selects an additional monaural sound track not audible during normal TV viewing.
	(Second Audio	The SAP signal might be related to the program (such as a sound track in a foreign
	Program)	language), or it might be unrelated (such as a weather report). If an SAP signal is
		broadcast, the letters SAP are displayed when you tune to the channel.

For assistance call 1(800) 332-2119