Mitsubishi Electronics SERIES 742 Resolving CEC Conflicts, Removing an Hdmi Device, Direct Keys

Page 40

40

3 HDMI Control of CEC Devices

Resolving CEC Conflicts

Because each manufacturer selects which CEC func- tions to support, some devices may conflict with other devices. If control conflicts arise, you can:

Turn off TV control of an individual CEC-enabled device (see below).

Turn off CEC in the device itself. Refer to the device’s Owner’s Guide for instructions.

Turning Off the TV’s HDMI Control of a CEC Device

1.Press MENU on the TV remote control.

2.Highlight Inputs > HDMI Control.

3.Move to the device name and press ENTER to select Off to turn off the TV’s ability to control the device.

4.Press EXIT to clear the menu.

Inputs > HDMI Control menu

Removing an HDMI Device

1.Power off the device.

2.Disconnect the HDMI cable.

3.Press MENU on the TV remote control to enter the TV main menu.

4.Go to Inputs > Name.

5.Highlight the HDMI input name and press ENTER to select Delete.

6.Press EXIT to clear the menus.

Inputs > Name menu with Delete selected for HDMI-3.

For assistance call 1(800) 332-2119

Using HDMI Control

As an example of using HDMI Control, press PLAY on the device itself to:

Power on the TV

Switch to the device (no need to display the Input Selection menu)

Begin play of the device

Direct Keys

Test your equipment with the TV’s remote control to find additional supported commands. See the table below for commands that may be available, depending on the individual device.

CEC-enabled VCR, DVD, and DVR functions that may be available:

Record/

Menu

Channel

Other

Playback

Navigation

Tuning

 

 

 

CH

Guide

 

 

 

 

 

Enter

Digits 0–9,

TOOLS

 

CANCEL

Check the

 

 

 

 

 

TOOLS menu

 

CANCEL

 

 

ENTER

for supported

 

(to cancel)

 

functions.

 

 

 

 

 

 

 

If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions. Try the VOL, MUTE, and menu-navigation keys.

Image 40
Contents Series FCC Declaration of Conformity Contents To Order a Replacement Lamp Under Warranty Lamp ReplacementChildren and TV Viewing Replacement Parts Outdoor Antenna GroundingSleep Timer Setting the Sleep TimerViewing or Changing the Sleep Timer FAV FavoritesPicture Shape and Display Formats Format DefinitionsEffect of Mitsubishi Formats on Picture Types DVD Image DefinitionsStatus Display Signal DefinitionsAbout Channel Numbers More On TV Inputs and Outputs Hdmi Inputs High-Definition Multimedia InterfaceHDMI-4 offered On the 842 seriesUSB-P Power Only USBComposite Video LANConnecting a Computer to the TV SignalsHdmi Connection DVI Video ConnectionUsing the TV with an Audio-Only Device Specialized TV ConnectionsPhotos and Motion Video as Composite Video TV jack panel Audio cablesComputer Video Adjustments Image ResolutionTip Distortion in Computer ImagesWireless Subwoofer Supplemental Audio Connections 842 seriesAdding a Subwoofer Subwoofer with Audio CableExternal Rear Speakers Right audio inputsTransmitter Set Sound Global Analog Audio Out to RearUsing the TV Speakers as a Center Channel Hdmi cableOutput Surround sound Source deviceHome Network Setup Wired Ethernet ConnectionStreamTV Internet About StreamTVTroubleshooting Using StreamTV Internet MediaWireless Connection Initial Setup Wireless Adapter Keyboard MouseRemote PC VNC Getting started with Remote PC VNC20 1. Additional TV Features Using Remote PC VNC Apps Keys for Remote PC applicationsMain Menu PicturePicture Reset Picture Perfect Picture AdvancedPicture 3D Mode Sound Audio SoundSAP Sound Auto SP Sound GlobalSound SoundPro Captions Setup Setup LanguageSetup Clock Setup TimerSetup Channel Adding/Deleting Channels Using the Channel Edit MenuAnt Air, Ant Cable EnterSetup Energy Setup NetworkInputs Name InputsGo to Inputs Name Inputs Update Hdmi Inputs Control Inputs OrderInputs StreamTV Inputs DemoLock TV LocksPass Code Parental MenuTips for Using the Lock Menu Using TV LocksBypassing TV Locks Lock Parental TV-YLock Time Lock ChannelLock Panel Lock OtherEnabling Hdmi Control CEC Devices Has No Hdmi Control OptionHdmi cable cannot support CEC Action Device does not have CEC compatibility ActionOptional Hdmi outputCable HDMI, you can use anyUsing Hdmi Control Resolving CEC ConflictsRemoving an Hdmi Device Turning Off the TV’s Hdmi Control of a CEC DeviceInstalling the Remote Control Batteries Cleaning RecommendationsCare of the Remote Control Appendix a TV CareAllow it to cool for at least One hour before attempting toReplace the lamp cartridge Lamp Part Number 915B455012Use only replacement lamp part number 915B455012 Replacement ProcedureInstalling the New Lamp Cartridge Removing the Old Lamp CartridgeAppendix B Troubleshooting Service and Customer SupportMode menu ServiceTV Channels Symptom Remarks Picture Symptom Remarks TV Power On/Off Symptom RemarksChange Lamp Energy from Standard to Bright Stream TV-VNC Problems Symptom Remarks Sound Symptom RemarksCheck that Digital Audio Output and/or AVR Audio Output Trademark and License Information Mitsubishi TV Software Mitsubishi TV SoftwareGNU General Public License Conveying Verbatim Copies Acceptance Not Required for Having Copies GNU General Public License No Warranty Version 2.1, February PreambleFor assistance call 1800 Mitsubishi Home-Cinema Television Limited Warranty Warranty Availability of Content on Third Party Services Internet Access Required for Third Party Services UpdatesThird Party Services Content Disclaimer Index Page Lamp-Substitution Alert System ResetTVsupport@mevsa.com