Connecting to a Video player, etc.
Video player, or the like
1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO terminal of the projector.
ENGLISH
To audio | 3 | |
output | ||
terminals | To video | |
4 | ||
output | ||
terminal | ||
| ||
COMPONENT VIDEO IN |
| |
To VIDEO | Audio/video | |
1 terminal | cable | |
To audio input |
| |
2 terminals |
|
2.Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector.
3.Connect the other end (yellow) of the audio/video cable to the video output terminal of the video equipment.
4.Connect the other end (white and red) of the audio/video cable to the audio output terminals (L, R) of the video equipment.
Video player, or the like
To
1 To | 2 |
To audio | |
terminal | output |
| terminals |
| 4 |
COMPONENT VIDEO IN |
|
Audio cable
3 (Option)
To audio input terminals
When the video equipment is equipped with the S- video output terminal, make the connection as follows.
1.Connect one end of the supplied
2.Connect the other end of the
3.Connect one end (white and red) of an audio cable to the audio input terminals (L/MONO, R) of the projector.
4.Connect the other end (white and red) of the audio cable to the audio output terminals (L, R) of the video equip- ment.
•Also read the instruction manual of the equipment to be connected.
•Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT terminals.
Component | PB/CB | |
cable (Option) | ||
PR/CR | ||
Y |
COMPONENT VIDEO IN
|
|
|
| To audio output | Audio cable (Option) |
|
|
|
| ||
PR/CR PB/CB | Y | terminal |
| ||
|
| ||||
To audio input terminal
DVD player
•Images may not be projected correctly depending on the type of the DVD player you use.
•Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.