Mitsubishi Electronics HC1100 Menu operation, Available settings in the menus, Image menu

Menu operation (continued)

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu 2.INSTALLATION menu 3. FEATURE menu 4.SIGNAL menu

opt.	opt.	opt.	SVGA60	opt.
SVGA60		SVGA60		SVGA60

IMAGE INSTALLATION FEATURE SIGNAL

CONTRAST	0		KEYSTONE	0		MENU POSITION	1.	HORIZ. POSITION	0
BRIGHTNESS	0		AUTO POWER	OFF		CINEMA MODE	AUTO	VERT. POSITION	0
			ON
CineRichColor	AUTO		AUTO POWER	OFF	?	VIDEO SIGNAL	AUTO	FINE SYNC.	0
			OFF
sRGB	OFF	ON	SPLASH SCREEN	ON		ASPECT	AUTO	TRACKING	0
COLOR TEMP.	6200K		BACK COLOR	BLUE		PASSWORD	MENU	COMPUTER	RGB
						FUNCTION	ACCESS	RRGGBB INPUT
COLOR	0		LAMP MODE	STANDARD	A Ë	LANGUAGE	English	SET UP	AUTO
TINT	0		IMAGE REVERSE	OFF		RESET ALL	OK	HOLD	ON

SHARPNESS	0			USER	OK
GAMMA MODE	AUTO
1. IMAGE menu
ITEM		SETTING	FUNCTION
CONTRAST		0 - 60	Use to adjust the contrast of the projected image. (See Page 24.)
BRIGHTNESS		±30	Use to adjust the brightness of the projected image. (See Page 24.)
CineRichColor		AUTO / 0 - 10	Use to adjust the white level of the projected image. Select AUTO for
			normal use. (See Page 24.)
sRGB		ON / OFF	Select whether or not to project emphasizing on the color reproducibility.
COLOR TEMP.		4 positions	Use to adjust the color temperature. (See Page 25.)
COLOR		0 - 20	Use to adjust the color thickness of the projected image. (See Page 24.)
TINT		±10	Use to adjust the color tint of the projected image. (See Page 24.)
SHARPNESS		0 - 10	Use to adjust the sharpness of the projected image. (See Page 24.)
GAMMA MODE		AUTO	The proper gamma mode is automatically selected depending on the input
			signal. Default is AUTO. THEATER1 is automatically selected for VCR
			image input signals such as 480i and 720p and STANDARD for computer
			image input signals such as XGA and SVGA.
		STANDARD	Select to secure the contrast even when the room lighting is increased to
			some extent.
		THEATER1	Select when watching movies in dim lighting as in a theater.
		THEATER2	Select to gain the halftone to make the skin color more vibrant even in a
			dark scene. This mode is suitable for TV viewing.

•For more enhanced color reproduction, set CineRichColor to 0. The white portion of the color wheel will be disabled and you can reproduce true-to-life images.

2. INSTALLATION menu
ITEM	SETTING	FUNCTION
KEYSTONE	±20	Use to correct vertical keystone distortion.
AUTO POWR ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.

•The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is
		supplied.
LAMP MODE	STANDARD	Select this option in normal use.
	LOW	Select to moderate the intensity of the lamp. The operating sound is
		reduced and the lamp lifetime becomes longer.

•Frequent switching of the lamp mode may damage the lamp.

IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on
		the floor.
	MIRROR	Select when viewing images projected from the behind of the screen with
		the projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with
		the projector installed on the ceiling.
MIRROR INVERT		Select when viewing images from the front with the projector installed on
		the ceiling.

•The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW lamp mode has been chosen, the default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.

EN-22