Mitsubishi Electronics HC1100 user manual Feature menu, Signal Menu

Page 23

3. FEATURE menu

 

ITEM

SETTING

FUNCTION

MENU POSITION

2 positions

Use to change the position of the menu.

CINEMA MODE

AUTO

The film mode will be automatically activated when a film source signal is

 

 

inputted.

 

OFF

The film mode will not be activated.

VIDEO SIGNAL

8 positions

When AUTO is selected, the appropriate video format is automatically

 

 

selected depending on the input signal. If the image isn’t displayed

 

 

correctly, select the desired video format manually.

ASPECT

AUTO

Select to change the aspect ratio automatically depending on the input

 

 

signal.

 

4:3

Select to project images with an aspect ratio of 4:3 when the input signal is

 

 

4:3 images.

 

16:9

Select to project images with an aspect ratio of 16:9.

 

EXPAND

Select to enlarge and project images of CinemaScope size or Vista size.

PASSWORD FUNCTION

 

Use to enable or cancel the password lock. See page 27 for details.

LANGUAGE

10 languages

Use to select the language used in the menus.

RESET ALL

 

Use to reset the settings of the menu (excluding PASSWORD FUNCTION,

 

 

and LANGUAGE) to the factory setting values.

4. SIGNAL Menu

 

ITEM

SETTING

FUNCTION

HORIZ. POSITION *

 

Use to adjust the horizontal position of the projected image.

VERT. POSITION *

 

Use to adjust the vertical position of the projected image.

FINE SYNC.

 

Use to eliminate flickering or blur, if appears, viewing the projected image.

TRACKING

 

Use to eliminate vertical wide stripes, if appears, viewing the projected

 

 

image.

COMPUTER INPUT

RGB

Select this option when connecting the projector to high definition video

 

 

equipment having R, G, and B output terminals.

 

YCBCR/YPBPR

Select this option when connecting the projector to a DVD player or other

 

 

device having Y, CB, and CR (or Y, PB, and PR) component video output

 

 

terminals.

SET UP

OFF

Select to make black area becomes lighter.

 

3.5%/7.5%

Select to make black area becomes thicker.

 

 

• When 7.5% is chosen, the brightness is decreased by set-up cancel func-

 

 

tion for U.S. Choose OFF, when the image is darkness. (The default

 

 

setting is 7.5%.)

HOLD

 

Use to adjust the image when flagging occurs near the top of the screen.

USER

 

 

CLAMP POSITION/

 

CLAMP WIDTH

Use to correct solid white or solid black in the projected image.

LPF

 

Use to whether or not to enable the LPF.

Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.

Options marked with * become unavailable depending on the type of the input signal.

When you change the horizontal or vertical position to a large extent, noise may appear.

The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position even when the setting value is changed, such symptom is not a malfunc- tion.

ENGLISH

EN-23

Image 23
Contents HC100 Compliance Notice When using the projector in EuropeContents Important safeguards Do not block the air inlet and outlet grilles Place of installationNever remove the cabinet Do not modify this equipmentControl Checking accessoriesPreparating your projector Inserting the batteries into the remoteButton OverviewControl area Terminal panelPreparating your projector Continue Remote controlUsing the picture quality adjusting buttons Adjustment foot Front Lamp cover Adjustment feet RearReception angle Using the remote controlOperational range of the remote control Adjusting the projection angle Setting up your projectorSetting up the screen Basic setupScreen size and projection distance When the aspect ratio of the screen isPreparations Connecting the projector to video equipmentViewing video images Basic home theater system connectionWhen a TV tuner or VCR is connected Connecting to a Video player, etcConnecting to a DVD player Viewing video images Connecting to video equipment having a DVI-D terminalPlugging in the power cord Preparation Projecting imagesTo stop projecting When projected images are distorted to a trapezoidWith the Feature menu Setting the aspect ratioHow to change the settings With the remote controlFor analog connection Connecting the projector to a computerPlugging the power cord Viewing computer imagesEN-19 Auto Position button When connecting to a notebook computerExample of the setting procedure for external output Viewing computer imagesMenu operation How to set the menusImage menu Available settings in the menusInstallation menu Menu operationSignal Menu Feature menuTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintTo enable the stored color temperature To adjust the tone of white Color TempAbout color temperature LPF Progressive filter Adjusting projected imagesTo adjust the vertical position To cancel the password function Advanced featuresPassword function To enable the password functionReplacing the lamp Interval of lamp replacementReset of the lamp operation time MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensDimension Drawings unit mm Asking for installationNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly TroubleshootingProblem Solution Temperature Others Problem SolutionAbnormal condition IndicatorsNormal condition Replacement part Option / Not included in the box SpecificationsConnectors SpecificationsNorth America Mitsubishi Projector Contact Information
Related manuals
Manual 5 pages 33.31 Kb