JVC AVO48WP30, AVO56WF30 manual Ons, Connecting to AV CompuLink IH

ons

Connecting to AV Compu°Link IH

JVC's AV Compu Link Ill feature makes playing video tapes totally automatic. Simply insert a pre_recorded tape* into your JVC_brand VCR and the VCR will automatically turn on and begin playback. At the same time, using the AV Compu Link, the VCR sends a signal to the television telling it to turn on and switch to the proper video input to watch a video tape.

•The AV Compu Link cable may be included with the JVC AV Compu Link accessory you wish to connect, if it is not, contact an authorized JVC Service Center for part # EWP 805-012.

•AV Compu Link Ill can only be used with JVC-brand products.

VCR

AV

Cornpu

Link

Swap

m

.

To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your VCR or other Compu Link device. Plug the other end of the AV Compu Link cable into the AV Compu Link input at the rear of the television.

Notes:

*In order for the VCR playback to begin automatically the recording 1aDsmust De removed from the VHS tape. If the tab is in place_ automatic switching will occur when you push the

VCR's PLAY but[on

,The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.

-If your JVC-brand VCR has "A Code/B Code Remote Control Switching (see your VCR's instruction book), usin9 VCR A Code will switch the TV to input 1. If you use Input 1 for

video input from your cable box. use VCR B Code to select the TV Video Input 2.

o To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi'sconnection instructions for detailed connection information.

o AV COMPU UNK Ill is compatible with all JVC AV COMPU LINK l!! devices

-The AV-56WP30 or AV-48WP30 can also receive Compu-Link signals from a DVD player. For details on operating a DVD player with AV Compu Link, please see your DVD player's owners manual.

1