In [ p
CHANNEL SUMMARY lets you customize the [ist of channels set after you run AUTO TUNER SETUP. You may delete unwanted channels or add channels that are new, or were not picked up by AUTO TUNER SETUP because of weak signals.
To access the CHANNEL SUMMARY, use the A T arrows to move to the CHANNEL SUMMARY option in the INITIAL SETUP menu. Select the option by pressing _ or _.
The CHANNEL SUMMARY screen wilt now be displayed with the channels set to scan marked with an "7" ,, You can delete channels from the scan by removing the
"_/ ". If any channels were missed during AUTO TUNER SETUP and you wish to
add them, you may by placing an "_/ " next to the channel number.
To add or delete channels, use the A T
arrows to move to the SCAN column. Use the A T arrows to move through the list of channels. Press 4 or l_ to include or delete channels from scanning. When you have added or deleted
all the channels you wish, you can leave the CHANNEL SUMMARY screen by pressing EXiT on the remote control.
CHANNEL SUMMARY - LOCK
You can also use the CHANNEL SUMMARY screen to lock certain channels. When a channel is locked, a code must be entered before the channel can be viewed.
To lock or unlock channels, use the A arrows to move to the Lock column
(marked with the _ icon), use the A T arrows to move though the list of channels. Press the ZERO button on the
remote control to lock or unlock a specific channel. A channel is locked when the icon appears next to it. When you are finished, you can leave the CHANNEL
SUMMARY screen by pressing EXIT on the remote control.
CHANNEL GUARD MESSAGE
When a viewer attempts to watch a guarded channel, this message appears:
To watch a channel that you have locked, enter the Lock Code using the 10 key pad (see "Set Lock Code" - page 38). If the wrong code is entered, the message INVALID LOCK CODE! will flash on the screen. The channel cannot be accessed unti[ the correct code is entered.
•Once a channel has been unlocked, it will remain unlocked until the
television is turned off.
32