JVC AVO56WF30, AVO48WP30 manual Number Buttons 10 KEY PAD, 100+ Button, Return+, VoCHIP

NUMBER BUTTONS - 10 KEY PAD

Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7:

_ 0 (Zero)

7 (Seven)

100+ BUTTON

Use the 100+ button to directly access channels above Channel 99. For example, to move to channel 124:

100+

(_ 2 (TWO)

4 (Four)

RETURN+

The RETURN+ button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the channels. To program:

RETURN+ and hold for three seconds.

You can now scan through the channels using the CH+i- buttons.

RETURN+

You will return to your programmed channel

•To cancel your RETURN+ channel, press and hold the RETURN+ button for three seconds. The message "RETURN CHANNEL CANCELLED!" will appear.

•RETURN+ works only with CHANNEL+i-. Pressing any number key will cancel RETURN+.

VoCHIP

By pressing the remote control V-CH_Pbutton, the V-chip rating information for the program which is being received is displayed on the screen.

if the V-chip rating information is not being sent, "UNRATED" is displayed on the screen. if the zero ("0") button is pressed while the V-chip rating is displayed on the screen, all categories with the same or a higher V-chip rating will be blocked.

For example, if you block movies rated NC-17, movies rated X will atso be blocked.

•V-chip blocks can be manually set one at a time by using the V-chip option in the iNiTiAL SETUP menu. For detailed information about V-chip ratings and V-chip manual settings, refer to pages 33 to 38.

57