JVC AVO48WP30, AVO56WF30 manual Set Leck Code

ip

Set Leck Code

Channel Guard and V_Chip settings are protected by a four-digit Lock Code. Your TV comes pre_set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below.

Access the onscreen menus by pressing ME_u on your remote control. You may then either

use the up and down arrows A T to scroll to the iNiTiAL SETUP menu, or press MENU until the iNiTIAL SETUP screen appears. Use the A • arrows to move to the Set Lock Code. Press the 4 or l_ arrows to select.

The Padlock icon _ will appear. Press Zero on the remote's lO_key pad to access the LOCK CODE.

Use the 4 or _ arrow to change the first digit. When you have selected the first number, move to the second digit by pressing the _'arrow. You can change this digit using the 4 _- arrows. Repeat this process until all four digits are set. When you have entered your LOCK CODE, press _' to move to FiNiSH.

Press 4 or _- to exit.

Notes: in order for _TCMp setting s to take eife t, V-Chip must'settings--be turned ON in 1

the V-CHIP menu (page 35), You can automatically UnMOCk a!l ef your restdct!ons by tur!ing I V-CMp settings OFF in the V_CH!R menu (page 35). You can always unblock a restr!CtiOn bY _ re-entering the V-CHIP menu and removing the lock icon.