Eiki LC-XG400L owner manual Image Adjustment, Image Adjust Menu

Page 42

Image Adjustment

Image Adjustment

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Image Adjust Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired item and then press the SELECT

button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color

Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63).

Tint

Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color temp..

Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow).

White balance (Red)

Press the Point 7 button to lighten red tone; press the Point

8button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63).

✔Notes:

•When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”.

•Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.36).

•Each input signal has different On-Screen Menu display.

*The figure below shows for video signal input.

Image Adjust Menu

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press the SELECT button.

Use the Point 7 8 buttons to adjust the setting value.

Press the SELECT button at this item to display other items.

Press the SELECT button here to display the previous items.

42

Image 42

Contents Model LC-XG400 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord for the United States and Canada CompliancePart Names and Functions Front Back !1 !2Kensington Security Slot Rear Terminal Reset button 4Infrared Remote Receiver BackTop Control Remote Control @0FOCUS button Adjust the focus p.30 @1NO Show button 4P-TIMER button9RESET/ON/ALL-OFF switch 3MENU buttonRemote Control Battery Installation Adjustable FeetRemote Control Code Installation Positioning the Projector for LC-XG400Moving the Lens Lens Installation Removing the lensAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart Connecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Menu Bar Operating with Projector Control Lens OperationInformation Sound Adjustment Direct OperationMenu Operation Operating with Remote Control Timer button No Show buttonKeystone button Laser Pointer Function Pointer FunctionSpotlight Wireless Mouse Operation Presentation Pointer buttonInput Remote Control OperationInput Selection Top Control OperationRGB PC analog RGB Scart RGB PC digital Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-Video AV System Menu Video or S-VideoSelecting Computer System Manually Computer AdjustmentComputer System Selection PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Noise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Menu Screen AdjustmentScreen Adjustment KeystoneScreen Size Adjustment Computer Signals For zooming in and out the images Digital zoom +Digital zoom Screen Size Adjustment Video, Component Signals Setting Menu Language SettingSetting PointerLogo select Logo Logo and Logo PIN code lock settingsLogo Capture CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Remote control Display Power management On startFan control setting Fan controlKey lock PIN code lock Change the PIN code lock settingChange the PIN code lock setting Enter a PIN codeTest pattern Change the PIN codeChange the PIN code Lamp counterFilter counter Factory defaultFactory default Filter counterReinstall the filter into the projector properly Lamp Replacement Reset the lamp counterPOA-LMP116 Service Parts No 335 Resetting the Lamp Counter Lamp counterProjector is shut down and all five indicators are blinking Then check the matters belowCleaning the Projection Lens Cleaning the Projector CabinetNo power TroubleshootingProblem AppendixTurning off power Auto PC adjustment functionDuring the operation Setting does not remain after Power management function doesAppendix System Menu TreeInput InformationPC Adjust Screen SettingIndicators and Projector Condition Projector ConditionLamp Replace indicator Resetting the counterCompatible Computer Specifications ON-SCREEN Resolution59.940 Technical Specifications Optional Parts PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsUSB Connector Series B Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoDimensions Canada Deutschland & ÖsterreichChina Eastern Europe