Eiki LC-XG400L owner manual Lamp Replace indicator, Resetting the counter

Appendix

WARNING FILTER indicator

Indicators

POWER	LAMP	WARNING
		FILTER
green	red
		orange

Projector Condition

Filter warning red icon

The filter is clogged. Stop using the projector immediately and clean or replace the filter (see below).

– –

Filter warning yellow icon

The Filter counter reached a set time. Clean or replace the filter as soon as possible.

If filter clogging is detected during operations, the Filter warning icon (red) appears on the screen and the WARNING FILTER indicator blinks orange, urging you to clean or replace the filter. Stop using the projector immediately and clean or replace the filter. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter is cleaned or replaced by a new one.

Filter warning icon (red) appears on the screen when the projector detects filter clogging.

✔Note:

•The Filter warning icon (red) will not appear during “Freeze” (p.30), or “No show” (p.31).

LAMP REPLACE indicator

	Indicators
POWER		LAMP	LAMP	Projector Condition
			REPLACE
green		red
			yellow
				The lamp cannot light up. (The projector is preparing for stand-by or
				the projection lamp is being cooled down. The projector cannot be
				turned on until cooling is completed.)
				The lamp cannot light up. (The lamp has been cooled down enough
				and the projector is in stand-by mode and ready to be turned on with
				the ON/STAND-BY button.)
–		–		The lamp has been used overtime. Replace the lamp immediately
				and then reset the lamp counter. The indicator will be turned off after
				resetting the counter.

*When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp. See pages 59–60.

69