Eiki LC-XG400L owner manual Sharpness, Gamma, Noise reduction, Progressive

Page 43

Image Adjustment

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off

Disabled.

L1

Lower reduction

L2

Higher reduction

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off

Disabled.

L1

For an active picture.

L2

For a still picture.

Film

For watching a film. With this function, the

 

projector reproduces pictures faithful to the

 

original film quality.

Notes:

Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.36).

Reset and Store icons will be displayed when more than one adjustment is made.

43

Image 43
Contents Model LC-XG400 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord for the United States and CanadaFront Back !1 !2 Part Names and FunctionsKensington Security Slot Rear Terminal 4Infrared Remote Receiver Back Reset buttonTop Control Remote Control 3MENU button 4P-TIMER button9RESET/ON/ALL-OFF switch @0FOCUS button Adjust the focus p.30 @1NO Show buttonAdjustable Feet Remote Control Battery InstallationRemote Control Code Positioning the Projector for LC-XG400 InstallationMoving the Lens Removing the lens Lens InstallationAttaching the lens to the projector Cables used for connection Connecting to a Computer Digital and Analog RGBConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart Projector side AC outlet side Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector Remote Control How to Operate the On-Screen MenuOn-Screen Menu Menu Bar Lens Operation Operating with Projector ControlInformation Direct Operation Sound AdjustmentMenu Operation Operating with Remote Control No Show button Timer buttonKeystone button Pointer Function Laser Pointer FunctionSpotlight Presentation Pointer button Wireless Mouse OperationTop Control Operation Remote Control OperationInput Selection InputVideo Component Input Source SelectionInput Menu RGB PC analog RGB Scart RGB PC digitalAV System Menu Video or S-Video Video System SelectionVideo or S-Video ComponentPC System Menu Computer AdjustmentComputer System Selection Selecting Computer System ManuallyAuto PC Adj Auto PC AdjustmentPC Adjust Menu To store adjustment parametersManual PC Adjustment To store the adjusted data To clear the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Progressive SharpnessGamma Noise reductionTo reset the adjusted data, select Reset and press Keystone Screen AdjustmentScreen Adjustment Screen MenuScreen Size Adjustment Computer Signals Digital zoom + For zooming in and out the imagesDigital zoom Screen Size Adjustment Video, Component Signals Pointer SettingSetting Setting Menu LanguageCapture Logo Logo and Logo PIN code lock settingsLogo Capture Logo selectEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Remote control Display On start Power managementFan control Fan control settingKey lock Enter a PIN code Change the PIN code lock settingChange the PIN code lock setting PIN code lockLamp counter Change the PIN codeChange the PIN code Test patternFilter counter Factory defaultFactory default Filter counterReinstall the filter into the projector properly Reset the lamp counter Lamp ReplacementPOA-LMP116 Service Parts No 335 Lamp counter Resetting the Lamp CounterThen check the matters below Projector is shut down and all five indicators are blinkingCleaning the Projector Cabinet Cleaning the Projection LensAppendix TroubleshootingProblem No powerPower management function does Auto PC adjustment functionDuring the operation Setting does not remain after Turning off powerAppendix Information Menu TreeInput SystemSetting PC Adjust ScreenProjector Condition Indicators and Projector ConditionResetting the counter Lamp Replace indicatorON-SCREEN Resolution Compatible Computer Specifications59.940 Technical Specifications Optional Parts PJ Link Notice Terminal Mini DIN 8-PIN Configurations of TerminalsUSB Connector Series B Terminal Analog RGB Mini D-sub 15 pinLogo PIN Code Lock No PIN Code Number MemoDimensions Eastern Europe Deutschland & ÖsterreichChina Canada