Davis Instruments Vantage Pro2 manual Wall Mounting

Page 11

Console Location

Wall Mounting

The console mounts to the wall using two keyholes located on the back of the case.

To mount the console on a wall:

1.Use a ruler to mark two mounting hole positions on the wall 8 inches (203 mm) apart.

8" (203mm)

Drill two 3/32" or 7/64" (2.4 to 2.8mm) holes

8" (203mm) apart for the #6 x 1" mounting screws.

This is a representation for the mounting hole positions. This template is not true to size.

If installing a standard Vantage Pro2 console with sensor cable running inside the wall, mount the console over an empty switch box.

2.Use a drill and a 3/32 or 7/64” (2.5 mm) drill bit to drill two pilot holes for the screws.

3.Using a screwdriver, drive the two #6 x 1” pan head self-threading screws into the wall. Leave at least 1/8” (3 mm) between the wall the heads of the screws.

4.If the kickstand has been pulled out from the case, push it back into its upright and locked position.

5.Guide the two keyholes on the back of the console over the two screw heads

8

Image 11

Contents Vantage Pro2 Console Manual Vantage Pro 2 Console Manual Vantage Pro2 Console Display FeaturesTable of Contents Printed on that key Console FeaturesChapter Welcome to Vantage Pro2 Keyboard & DisplayOptional WeatherLink Software Vantage Pro OptionsConsole Modes Optional SensorsOptional Accessories Ies provide backup power for up to four to six weeks Chapter Installing the ConsolePowering the Console Installing the AC Power Adapter Connecting Cabled Stations Installing BatteriesCabled console Installation ManualConsole Location Tested and establishedTable & Shelf Placement Wall Mounting Setup Mode Commands Chapter Using Your Weather StationSetup Mode Screen 1 Active Transmitters Screen 1 Active TransmittersScreen Screen 2 Configuring Transmitter IDs Wireless OnlyScreen 3 Retransmit Wireless Only Screen 4 Time & Date Screen 5 Latitude Screen 7 Time Zone Screen 6 LongitudeScreen 8 Daylight Savings Settings Screen 10 Elevation Screen 9 Daylight Savings StatusScreen 11 Wind Cup Size Screen 12 Rain Collector Screen 14 Serial Baud Rate Data logger installed on the consolePress and release 2ND and press Units once Screen 13 Rain SeasonClear All Command Current Weather ModeSelecting Weather Variables Selecting Units of MeasurePress Wind to select wind speed Selected variable’s units will change. RepeatWind Chill is displayed in either Fahrenheit ºF or Cen Press 2ND then press Chill to select Wind ChillPress 2ND then press Heat to display the Heat Index Ticker at the bottom of the screen Press Rainday to display the rain accumulated since 12 midNight. Any rain accumulated in the last 24 hours displays Screen display. Press 2ND then Lamps again to turn the back Press 2ND then press Lamps to turn on the backlight forDisplaying Time & Date or Sunrise & Sunset Calibrating, Setting, and Clearing VariablesCalibrating Temperature And Humidity Displaying the ForecastReading After a moment, the variable you’ve selected beginsCalibrate Wind Direction Reading Clearing Weather Variables Setting Weather VariablesCalibrating Barometric Pressure Highs and Lows Mode Viewing Highs and Lows Four Special Alarms Alarm ModeClearing Alarm Settings Setting AlarmsSetting the Time Alarm Press Done to silence an alarm when it sounds Graph ModeSilencing Alarms Viewing Graphs Weather Variable Available Graphs Problem Solution Chapter Troubleshooting and MaintenanceVantage Pro2 Troubleshooting Guide Rain Accessible to a cabled weather station Console Diagnostic ScreensNumber of missed data packets Number of packets containing errors that were receivedReception Diagnostic Screen One Year Limited Warranty Console MaintenanceAppendix a Weather Data Ity has a large capacity to absorb extra water vapor 30% even though water vapor content does not changeSor Tive humidityBarometric Pressure Skin Phototype Skin color Tanning & Sunburn history Pro2 displays UV readings in two scales MEDs and UV IndexMED for persons with very light skin III Skin Type Skin Color History of Tanning & SunburningIndex Values Exposure Category Console Appendix B SpecificationsWireless Communication Specifications Console Data Display Specifications Variable Required Sensors Weather Data SpecificationsThsw Forecast Vantage Pro2 Console Icons