Davis Instruments Vantage Pro2 Setting Alarms, Setting the Time Alarm, Clearing Alarm Settings

Page 36

Alarm Mode

Time

The time alarm is a standard “alarm clock” alarm. It sounds for one minute at the set time. Make sure you choose AM or PM, if you’re in 12-hour mode.

UV Dose

The UV dose alarm sounds when the accumulated UV dose has exceeded the dose you set. The UV dose alarm does not arm unless the initial UV dose for the day has been reset. Once the UV dose alarm value is set, clear the accumulated UV dose. See “Clearing Weather Variables” on page 29.

Setting Alarms

1.Press ALARM to enter the Alarm Mode to view or set the high alarm thresholds. The screen displays the current high alarm thresholds. The ALARM and HIGHS icons also appear.

2.Press the right and left arrows to select one of the variables displayed on the screen or use the console keys to select any weather variable. Also, press HI/LOW to display the toggle between the high and low alarm threshold settings.

3.Press 2ND then press ALARM to activate the currently selected weather variable.

4.Press the right and left arrows to select digits in the threshold value.

5.Press the up and down arrows to change the digit’s value up and down.

6.Press DONE to finish changing the alarm setting.

7.Repeat steps 3 through 6 to change additional alarm settings.

8.Press DONE to exit Alarm Mode.

Setting the Time Alarm

1.Press ALARM to enter alarm mode. The ALARM and HIGHS icons appear.

2.Press 2ND, then press TIME, then press 2ND again, and then press

ALARM.

The time field begins blinking.

3.Press the left and right arrows to select hours, minutes, or AM/PM.

4.Press up and down arrows to change the digit’s value up and down.

5.Press DONE to exit Alarm Mode.

Clearing Alarm Settings

1.Press ALARM to enter alarm mode. The ALARM and HIGHS icons appear.

2.Select the alarm setting you wish to clear.

3.Press 2ND, then press and hold CLEAR until the setting changes to all dashes.

33

Image 36

Contents Vantage Pro2 Console Manual Vantage Pro2 Console Display Features Vantage Pro 2 Console ManualTable of Contents Console Features Chapter Welcome to Vantage Pro2Keyboard & Display Printed on that keyVantage Pro Options Console ModesOptional Sensors Optional WeatherLink SoftwareOptional Accessories Chapter Installing the Console Powering the ConsoleInstalling the AC Power Adapter Ies provide backup power for up to four to six weeksInstalling Batteries Connecting Cabled StationsInstallation Manual Console LocationTested and established Cabled consoleTable & Shelf Placement Wall Mounting Chapter Using Your Weather Station Setup ModeSetup Mode Commands Screen 1 Active Transmitters Screen 1 Active TransmittersScreen 2 Configuring Transmitter IDs Wireless Only Screen 3 Retransmit Wireless OnlyScreen Screen 4 Time & Date Screen 5 Latitude Screen 6 Longitude Screen 7 Time ZoneScreen 8 Daylight Savings Settings Screen 9 Daylight Savings Status Screen 10 ElevationScreen 11 Wind Cup Size Screen 12 Rain Collector Data logger installed on the console Press and release 2ND and press Units onceScreen 13 Rain Season Screen 14 Serial Baud RateCurrent Weather Mode Clear All CommandSelecting Units of Measure Selecting Weather VariablesSelected variable’s units will change. Repeat Press Wind to select wind speedPress 2ND then press Chill to select Wind Chill Wind Chill is displayed in either Fahrenheit ºF or CenPress 2ND then press Heat to display the Heat Index Press Rainday to display the rain accumulated since 12 mid Night. Any rain accumulated in the last 24 hours displaysTicker at the bottom of the screen Press 2ND then press Lamps to turn on the backlight for Screen display. Press 2ND then Lamps again to turn the backCalibrating, Setting, and Clearing Variables Calibrating Temperature And HumidityDisplaying the Forecast Displaying Time & Date or Sunrise & SunsetAfter a moment, the variable you’ve selected begins Calibrate Wind Direction ReadingReading Setting Weather Variables Calibrating Barometric PressureClearing Weather Variables Highs and Lows Mode Viewing Highs and Lows Alarm Mode Four Special AlarmsSetting Alarms Setting the Time AlarmClearing Alarm Settings Graph Mode Silencing AlarmsPress Done to silence an alarm when it sounds Viewing Graphs Weather Variable Available Graphs Chapter Troubleshooting and Maintenance Vantage Pro2 Troubleshooting GuideProblem Solution Rain Console Diagnostic Screens Accessible to a cabled weather stationNumber of packets containing errors that were received Number of missed data packetsReception Diagnostic Screen Console Maintenance One Year Limited WarrantyAppendix a Weather Data 30% even though water vapor content does not change SorTive humidity Ity has a large capacity to absorb extra water vaporBarometric Pressure Pro2 displays UV readings in two scales MEDs and UV Index MED for persons with very light skinSkin Phototype Skin color Tanning & Sunburn history Skin Type Skin Color History of Tanning & Sunburning IIIIndex Values Exposure Category Appendix B Specifications Wireless Communication SpecificationsConsole Console Data Display Specifications Weather Data Specifications Variable Required SensorsThsw Vantage Pro2 Console Icons Forecast