Davis Instruments Vantage Pro2 manual Press 2ND then press Heat to display the Heat Index

Selecting Units of Measure

Pressure Trend

The pressure trend arrow indicates the current barometric trend, measured over the last three hours. The pressure trend is updated every 15 minutes. The pressure trend requires three hours of data in order to be calculated so it won’t display right away on a new station. The pressure trend is always indicated on the console screen, as long as the required data is available.

WIND		N				pm
	NW		NE
				TEMP OUT	HUM OUT	BAROMETER
W			E	F			hPa
		MPH		TEMP IN
	SW		SE		UV
				F			F
		S			index
			hr
Last	24 hrs	Every 1				THSW	INDEX
				DAILY RAIN		RAIN	YEAR
					in		in
Vertical Scale:			X10		STATION NO.1

UV

F

index

THSW INDEX

F

HEAT INDEX

UV, Heat, and THSW Index

UV (Ultraviolet Radiation)

UV

Press 2ND and UV to display the current UV index. The 2ND RAINYR current UV index is the amount of ultraviolet radiation the

sensor is currently reading.

Press 2ND and UV again to display the accumulated UV index for the day. The accumulated UV index is the total ultraviolet radiation that the sensor has read throughout the day. The accumulated UV index for the day is reset to zero every night.

Note:	Requires a UV sensor. (See “Optional Sensors” on page 2)
	Heat Index		HEAT
	Press 2ND then press HEAT to display the Heat Index.	2ND
			TEMP

THSW Index

After you have selected the Heat Index, press 2ND then press HEAT again to select the Temperature Humidity Sun Wind (THSW) Index. The THSW Index is only available on stations equipped with a solar radiation sensor.

The Heat Index and the THSW Index display in the same place on the screen and are displayed in degrees Fahrenheit (ºF) or Centigrade (ºC).

24