PLUS Vision V3-111, V3-131 user manual Installation Height of Projection Screen Reference, Example

Page 16

Placement Guide

Installation Height of Projection Screen [Reference]

Once the installation location and position have been decided, the projection height should be checked. In the case of large screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.

The required installation height can be found using the following formula:

[Height from center of lens to top edge of the projection(h1)] m (feet) + 0.03m (0.1 feet) + Stand height

Example:

Using a 150" 4:3 screen and placing the projector horizontally, the required installation height will be 3.13m (10.3 feet) + 0.03m (0.1 feet) = 3.16m (10.4 feet) (without a stand)

An installation room with a height of 2.4m (7.9 feet) will have insufficient room height even when the projector is placed on the floor. (The rear adjusters can be extended to lower the projected image.)

 

Screen size vertical

 

Lens center

dimension

Screen size top edge

 

 

dimension measured

 

 

from floor

 

Approx. 0.03m (0.1feet)

 

 

Stand dimension

 

E-16

Image 16
Contents V3-131 Precautions DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Expendables and Options Checking the Supplied AccessoriesV3 Series lamps Model V3-120 ordering code Names of the Main Unit Parts Handling the Lens UnitBuilt-in Security Slot Standby Auto SourceNames of the Remote Control Parts Video / S-VIDEOPreparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide V3-131 Screen Size and Projection DistancePlacement Guide V3-111 Screen Size and Projection DistanceInstallation Height of Projection Screen Reference ExamplePersonal computer RGB signal cable Supplied item Connections with Personal ComputerConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Operating Switch on the projector powerStandby button on main unit Power Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Turn the focus ring and adjust the focus of the screenMaking Adjustments with the Adjusters Adjustment of the Projection ScreenAdjuster button Lowering the projection image Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Adjustment of the Volume KeystoneImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Press the Enter button and start the timerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuVolume Cancel button Menu Operation MethodMenu button Select buttonsAdjustment Bar and Settings Contents Menu Screen Names and FunctionsMenu Operation Method Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewOption Menu name Item Name Sub Menu SetupInfo Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterKeystone Save Vertical FlipView Auto Power Off SetupAuto Source Menu Position SetupThis function sets the display position of the menu Presentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundSecurity Lock Startup ScreenOption Factory Default Lamp Timer ResetInfo StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Specifications OpticalElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Cabinet Dimensions 2003

V3-111, V3-131 specifications

The PLUS Vision V3-131 and V3-111 are state-of-the-art visual presenters designed to meet the demands of modern educational and business environments. Known for their superior image quality and user-friendly design, these models have gained a reputation for reliability and performance.

The PLUS Vision V3-131 is equipped with a 12-megapixel camera that provides stunning clarity and detail in every image, enabling users to display documents, objects, and other materials with remarkable precision. Its advanced autofocus feature ensures that the focus remains sharp regardless of the distance, making it ideal for showcasing both small and large items. The integrated LED lights illuminate the subject matter without causing glare, enhancing visibility in various lighting conditions.

Conversely, the V3-111 model comes with an 8-megapixel camera, which still delivers high-quality images suitable for most presentations and educational purposes. While slightly lower in resolution than the V3-131, the V3-111 maintains excellent image clarity, making it a cost-effective solution for those not requiring the highest level of detail.

Both models incorporate a versatile design that supports various input sources, including HDMI, USB, and VGA. This connectivity allows users to easily plug into different devices, ensuring seamless transitions between presentations. Additionally, both models feature a USB connection that allows for easy file transfer and direct linkage to computers for enhanced functionality.

One of the standout characteristics of both the V3-131 and V3-111 is their simplicity of use. The intuitive controls are designed for users of all technological backgrounds, allowing for quick adjustments and easy navigation through the menu settings. Furthermore, the flexible arm design enables users to adjust the camera angle and height effortlessly, catering to various presentation scenarios.

In terms of portability, both models are lightweight and compact, making them ideal for frequent use in classrooms and conference rooms. The robust build quality ensures durability while allowing for easy storage between uses.

Overall, the PLUS Vision V3-131 and V3-111 visual presenters exemplify innovation in presentation technology, offering exceptional features such as high-resolution cameras, versatile connectivity, and ease of use. Whether in an educational setting or a corporate environment, these devices provide an effective solution for engaging and impactful presentations.