Adjustment of the Projection Screen
Making Adjustments with the Adjusters
Raising the projection image
While viewing the projection image, (1) press and hold the front adjuster buttons located at the left and right and,
(2) raise the projector to align the image with the screen, (1) then release your fingers.
Turn the left and right front adjusters for fine adjustment. Adjust so that there is no shaking of the projector.
AUTO | SOURCE |
|
STATUS | STANDBY |
| STANDBY |
| PUSH |
(2)
(1)
Adjuster button
Lowering the projection image
Use the procedure described above to lower the front adjusters.
If the rear adjusters are turned to lift the rear, the pro- jected image lowers.
Adjust so that there is no shaking of the projector.
PUSH
AUDIO | S- |
| |
| VIDEO |
| VIDEO |
| S | |
| TA | |
| ND | |
S | BY | |
ST | ||
TA | ||
ND | AT | |
BY | US | |
AU |
| |
TO |
| |
SO |
| |
UR |
| |
CE |
|
RGB
Note:
When the projector has a rear installation is used, the orientation of the projection will need to be changed. Please see “Vertical Flip” on Page