PLUS Vision V3-111, V3-131 user manual Cleaning a Soiled Projector Main Unit, Dirty Lens

Page 60

Cleaning

Be certain to disconnect the power plug from the power outlet before cleaning.

Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the coatings may peel, etc.

Cleaning a Soiled Projector Main Unit

Wipe with a lint-free, soft, dry cloth.

When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a chemically-treated cloth is going to be used, please follow any written warnings.

Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings may peel, etc.

When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust. Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.

Dirty Lens

Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning paper for eye glasses. Be careful not to scratch the lens at this time.

Dust of the Intake and Outflow Holes

Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.

Switch off the power, check that the STANDBY indicator has changed to a steadily lit amber, then unplug the power cable.

Clean out the holes from the outside using a vacuum cleaner. Use the brush adapter of the vacuum cleaner to do this. Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.

AUDIO

S-

 

 

VIDEO

 

VIDEO

 

PUSH

STANDBY

STANDBY

STATUS

SOURCE

AUTO

 

RGB

Cleaning the Inside of the Projector

Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact your dealer.

E-60

Image 60
Contents V3-131 Precautions DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Checking the Supplied Accessories Expendables and OptionsV3 Series lamps Model V3-120 ordering code Names of the Main Unit Parts Handling the Lens UnitBuilt-in Security Slot Standby Auto SourceNames of the Remote Control Parts Video / S-VIDEOPreparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide V3-131 Screen Size and Projection DistancePlacement Guide V3-111 Screen Size and Projection DistanceInstallation Height of Projection Screen Reference ExamplePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Switch on the projector power OperatingStandby button on main unit Power Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Turn the focus ring and adjust the focus of the screenMaking Adjustments with the Adjusters Adjustment of the Projection ScreenAdjuster button Lowering the projection image Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeFreezing a Moving Picture Adjustment of the Volume KeystoneEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Press the Enter button and start the timerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsVolume Cancel button Menu Operation MethodMenu button Select buttonsAdjustment Bar and Settings Contents Menu Screen Names and FunctionsMenu Operation Method Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterVertical Flip Keystone SaveView Setup Auto Power OffAuto Source Setup Menu PositionThis function sets the display position of the menu Presentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundStartup Screen Security LockOption Factory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Specifications OpticalElectrical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Cabinet Dimensions 2003

V3-111, V3-131 specifications

The PLUS Vision V3-131 and V3-111 are state-of-the-art visual presenters designed to meet the demands of modern educational and business environments. Known for their superior image quality and user-friendly design, these models have gained a reputation for reliability and performance.

The PLUS Vision V3-131 is equipped with a 12-megapixel camera that provides stunning clarity and detail in every image, enabling users to display documents, objects, and other materials with remarkable precision. Its advanced autofocus feature ensures that the focus remains sharp regardless of the distance, making it ideal for showcasing both small and large items. The integrated LED lights illuminate the subject matter without causing glare, enhancing visibility in various lighting conditions.

Conversely, the V3-111 model comes with an 8-megapixel camera, which still delivers high-quality images suitable for most presentations and educational purposes. While slightly lower in resolution than the V3-131, the V3-111 maintains excellent image clarity, making it a cost-effective solution for those not requiring the highest level of detail.

Both models incorporate a versatile design that supports various input sources, including HDMI, USB, and VGA. This connectivity allows users to easily plug into different devices, ensuring seamless transitions between presentations. Additionally, both models feature a USB connection that allows for easy file transfer and direct linkage to computers for enhanced functionality.

One of the standout characteristics of both the V3-131 and V3-111 is their simplicity of use. The intuitive controls are designed for users of all technological backgrounds, allowing for quick adjustments and easy navigation through the menu settings. Furthermore, the flexible arm design enables users to adjust the camera angle and height effortlessly, catering to various presentation scenarios.

In terms of portability, both models are lightweight and compact, making them ideal for frequent use in classrooms and conference rooms. The robust build quality ensures durability while allowing for easy storage between uses.

Overall, the PLUS Vision V3-131 and V3-111 visual presenters exemplify innovation in presentation technology, offering exceptional features such as high-resolution cameras, versatile connectivity, and ease of use. Whether in an educational setting or a corporate environment, these devices provide an effective solution for engaging and impactful presentations.