PLUS Vision V3-131, V3-111 user manual Replacing the Lamp Cartridge

Page 61

Replacing the Lamp Cartridge

•The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is about 1500 hours (when used in normal mode only). This could be shortened depending on conditions of use and other factors.

Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from test conditions at this company.)

•When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the replacement following the procedure below.

•If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode and no longer turns on.

•Contact a store that sells the V3-131/V3-111 for a replacement lamp. Indicate you need a V3-120 replacement lamp for the V3-131/V3-111 (order code 28-051).

CAUTION

•Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop, disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will cause burns because of the high temperature.

•Do not remove any screws other than those specified.

•Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.

•If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased.

E-61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents V3-131 DOC Compliance Notice PrecautionsPower Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Expendables and Options Checking the Supplied AccessoriesV3 Series lamps Model V3-120 ordering code Handling the Lens Unit Names of the Main Unit PartsStandby Auto Source Built-in Security SlotVideo / S-VIDEO Names of the Remote Control PartsButton Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen V3-131 Screen Size and Projection Distance Placement GuideV3-111 Screen Size and Projection Distance Placement GuideExample Installation Height of Projection Screen ReferenceConnections with Personal Computer Personal computer RGB signal cable Supplied itemConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Operating Switch on the projector powerStandby button on main unit Press the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorFinishing Unplug the power cableAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Turn the focus ring and adjust the focus of the screenAdjustment of the Projection Screen Making Adjustments with the AdjustersAdjuster button Lowering the projection image Raising the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture Keystone Adjustment of the VolumeImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Press the Enter button and start the timer Using the Presentation TimerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Canceling the password/Changing the password Input the password using the number buttons 1 toCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuVolume Menu Operation Method Cancel buttonMenu button Select buttonsMenu Screen Names and Functions Adjustment Bar and Settings ContentsMenu Operation Method Menu Name Cursor Deep BlueMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation View ColorOption Menu name Item Name Sub Menu SetupInfo Image Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionFine Picture ResetPosition ImageColor Select the preset color modeQuick Color Adj GammaColor Temp Selection contents at the time of YPbPr inputWhite Color SpaceWhite Balance View Video SignalsAspect FilterKeystone Save Vertical FlipView Auto Power Off SetupAuto Source Menu Position SetupThis function sets the display position of the menu To start the timer Presentation TimerInput Format Video and S-VideoLanguage OptionOn Screen BackgroundSecurity Lock Startup ScreenOption Lamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Cabinet Dimensions 2003

V3-111, V3-131 specifications

The PLUS Vision V3-131 and V3-111 are state-of-the-art visual presenters designed to meet the demands of modern educational and business environments. Known for their superior image quality and user-friendly design, these models have gained a reputation for reliability and performance.

The PLUS Vision V3-131 is equipped with a 12-megapixel camera that provides stunning clarity and detail in every image, enabling users to display documents, objects, and other materials with remarkable precision. Its advanced autofocus feature ensures that the focus remains sharp regardless of the distance, making it ideal for showcasing both small and large items. The integrated LED lights illuminate the subject matter without causing glare, enhancing visibility in various lighting conditions.

Conversely, the V3-111 model comes with an 8-megapixel camera, which still delivers high-quality images suitable for most presentations and educational purposes. While slightly lower in resolution than the V3-131, the V3-111 maintains excellent image clarity, making it a cost-effective solution for those not requiring the highest level of detail.

Both models incorporate a versatile design that supports various input sources, including HDMI, USB, and VGA. This connectivity allows users to easily plug into different devices, ensuring seamless transitions between presentations. Additionally, both models feature a USB connection that allows for easy file transfer and direct linkage to computers for enhanced functionality.

One of the standout characteristics of both the V3-131 and V3-111 is their simplicity of use. The intuitive controls are designed for users of all technological backgrounds, allowing for quick adjustments and easy navigation through the menu settings. Furthermore, the flexible arm design enables users to adjust the camera angle and height effortlessly, catering to various presentation scenarios.

In terms of portability, both models are lightweight and compact, making them ideal for frequent use in classrooms and conference rooms. The robust build quality ensures durability while allowing for easy storage between uses.

Overall, the PLUS Vision V3-131 and V3-111 visual presenters exemplify innovation in presentation technology, offering exceptional features such as high-resolution cameras, versatile connectivity, and ease of use. Whether in an educational setting or a corporate environment, these devices provide an effective solution for engaging and impactful presentations.
Top Page Image Contents