PLUS Vision V3-111, V3-131 user manual Finishing, Unplug the power cable

Page 24

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equip- ment

2 Switch off the power of the projector

Press the STANDBY button.

STANDBY

(button on main unit)

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off operation.

Note:

Do not stow away the lens unit while projecting an image. Doing so could damage the projector. If the lens unit has been stowed away while projecting an image, the STATUS and STANDBY indicator’s flash orange and the projector is automatically turned off.

Note:

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY button will switch off the power.

The STANDBY indicator changes to flashing amber and lights a steady amber after about 90 seconds (when the unit enters the standby mode).

STANDBY STATUS STANDBY STATUS STANDBY STATUS

 

Flashing amber

Lit green

Lit amber

(Approximately 90

 

Standby mode

 

seconds)

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is un- plugged.

4 ￿ Press down on the lens unit until a “click” is heard and the lens unit locks.

￿Slide the lens shutter to the right to close it.

STANDBY

MENU

RGB

ENTER

VIDEO CANCEL

QUICK

Q

FREEZE MUTE ECO AUTO

1 2 3 4

ASPECT

Power Off

OK ?

AUTO

SOURCE

 

STATUS

STANDBY

1

STANDBY

 

PUSH

2

Warrning

Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp or damage the projector.

E-24

Image 24
Contents V3-131 Precautions DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Checking the Supplied Accessories Expendables and OptionsV3 Series lamps Model V3-120 ordering code Names of the Main Unit Parts Handling the Lens UnitBuilt-in Security Slot Standby Auto SourceNames of the Remote Control Parts Video / S-VIDEOPreparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide V3-131 Screen Size and Projection DistancePlacement Guide V3-111 Screen Size and Projection DistanceInstallation Height of Projection Screen Reference ExamplePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Switch on the projector power OperatingStandby button on main unit Power Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Turn the focus ring and adjust the focus of the screenMaking Adjustments with the Adjusters Adjustment of the Projection ScreenAdjuster button Lowering the projection image Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeFreezing a Moving Picture Adjustment of the Volume KeystoneEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Press the Enter button and start the timerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsVolume Cancel button Menu Operation MethodMenu button Select buttonsAdjustment Bar and Settings Contents Menu Screen Names and FunctionsMenu Operation Method Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterVertical Flip Keystone SaveView Setup Auto Power OffAuto Source Setup Menu PositionThis function sets the display position of the menu Presentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundStartup Screen Security LockOption Factory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Specifications OpticalElectrical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Cabinet Dimensions 2003

V3-111, V3-131 specifications

The PLUS Vision V3-131 and V3-111 are state-of-the-art visual presenters designed to meet the demands of modern educational and business environments. Known for their superior image quality and user-friendly design, these models have gained a reputation for reliability and performance.

The PLUS Vision V3-131 is equipped with a 12-megapixel camera that provides stunning clarity and detail in every image, enabling users to display documents, objects, and other materials with remarkable precision. Its advanced autofocus feature ensures that the focus remains sharp regardless of the distance, making it ideal for showcasing both small and large items. The integrated LED lights illuminate the subject matter without causing glare, enhancing visibility in various lighting conditions.

Conversely, the V3-111 model comes with an 8-megapixel camera, which still delivers high-quality images suitable for most presentations and educational purposes. While slightly lower in resolution than the V3-131, the V3-111 maintains excellent image clarity, making it a cost-effective solution for those not requiring the highest level of detail.

Both models incorporate a versatile design that supports various input sources, including HDMI, USB, and VGA. This connectivity allows users to easily plug into different devices, ensuring seamless transitions between presentations. Additionally, both models feature a USB connection that allows for easy file transfer and direct linkage to computers for enhanced functionality.

One of the standout characteristics of both the V3-131 and V3-111 is their simplicity of use. The intuitive controls are designed for users of all technological backgrounds, allowing for quick adjustments and easy navigation through the menu settings. Furthermore, the flexible arm design enables users to adjust the camera angle and height effortlessly, catering to various presentation scenarios.

In terms of portability, both models are lightweight and compact, making them ideal for frequent use in classrooms and conference rooms. The robust build quality ensures durability while allowing for easy storage between uses.

Overall, the PLUS Vision V3-131 and V3-111 visual presenters exemplify innovation in presentation technology, offering exceptional features such as high-resolution cameras, versatile connectivity, and ease of use. Whether in an educational setting or a corporate environment, these devices provide an effective solution for engaging and impactful presentations.