Axis Communications axis user manual Storage, UPnPTM, RTP/H.264, Bonjour, SD Card

Page 41

AXIS M1143–L

System Options

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to Factory Default Settings on page 44.

UPnPTM

The Axis product includes support for UPnPTM. UPnPTM is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

UPnPTM can be disabled under System Options > Network > UPnPTM.

RTP/H.264

The RTP port range and multicast settings are conﬁgured under System Options > Network > RTP.

The RTP port range deﬁnes the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following ﬁle systems:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be re-formatted to the desired ﬁle system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired ﬁle system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

41

Image 41

Contents Axis M1143-L About this Document Photobiological SafetyLiability Intellectual Property RightsAxis M1143-L Table of ContentsHardware Overview ConnectorsHardware Overview Color Indication LED IndicatorsAccess from a Browser Accessing the ProductAccessing the Product Set the Root Password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAxis M1143-L Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1143-L Basic Setup Setting Up the ProductSetting Up the Product Pixel Counter VideoVideo Stream 264 Stream ProﬁlesImage Exposure Settings Camera SettingsImage Appearance White BalanceOverlay View AreaOverlay Image Go to Video Video Stream and select the Image tabGo to Video Overlay Image Privacy MaskLive View Conﬁg Default Viewer for BrowsersLive View Conﬁg Go to Setup Live View Conﬁg Viewer SettingsUser Deﬁned Links Output ButtonsAxis M1143-L PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesLow level 0% Events EventsGo to Events Action Rules and click Add Setting Up an Action RulePTZ Control Recurrences RecipientsSchedules Go to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingAxis M1143-L System Options System OptionsSecurity UsersGo to System Options Security Https IeeeCertiﬁcates Go to System Options Security Certiﬁcates Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsScripting Reset to Factory Default SettingsFile Upload Plain ConﬁgTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Status and Network indicator LEDs are ﬂashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Video Camera Settings Video and image problems, generalProblems uploading ﬁles No images displayed on webMotion Detection triggers unexpectedly Storage and disk management problemsTechnical Speciﬁcations Technical SpeciﬁcationsMaintenance General Casing Function/group Speciﬁcations InstallationPower ConnectorsPerformance Considerations

Related manuals

Manual 87 pages 11.7 Kb