Axis Communications axis user manual LED Indicators, Color Indication

Page 5

AXIS M1143–L

Hardware Overview

•Connecting to an AXIS Video Hosting System service. See page 37. To connect, press and hold the button for about 1 second until the Status LED ﬂashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 38. To connect, press and hold the button for about 3 seconds.

•Resetting the product to factory default settings. See page 44.

I/O terminal connector - Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm notiﬁcations. In addition to an auxiliary power and a GND pin, the I/O terminal connector provides the interface to:

•Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

•Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices).

LED Indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 MBit/s network. Flashes for network activity.
	Amber	Steady for connection to a 10 MBit/s network. Flashes for network activity.
	Unlit	No network connection.

Status	Green	Steady green for normal operation.
	Amber	Steady during startup and when restoring settings.
	Red	Slow ﬂash for failed upgrade.

Power	Green	Normal operation.
	Amber	Flashes green/amber during ﬁrmware upgrade.

Note

•The Status LED can be conﬁgured to be unlit during normal operation. To conﬁgure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be conﬁgured to ﬂash while an event is active.

•The Status LED can be conﬁgured to ﬂash for identifying the unit. Go to Setup > System Options > Maintenance .

5

Image 5

Contents Axis M1143-L About this Document Photobiological SafetyLiability Intellectual Property RightsAxis M1143-L Table of ContentsHardware Overview ConnectorsHardware Overview Color Indication LED IndicatorsAccess from a Browser Accessing the ProductAccessing the Product Set the Root Password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAxis M1143-L Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1143-L Basic Setup Setting Up the ProductSetting Up the Product Pixel Counter VideoVideo Stream 264 Stream ProﬁlesImage Exposure Settings Camera SettingsImage Appearance White BalanceOverlay View AreaOverlay Image Go to Video Video Stream and select the Image tabGo to Video Overlay Image Privacy MaskLive View Conﬁg Default Viewer for BrowsersLive View Conﬁg Go to Setup Live View Conﬁg Viewer SettingsUser Deﬁned Links Output ButtonsAxis M1143-L PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesLow level 0% Events EventsGo to Events Action Rules and click Add Setting Up an Action RulePTZ Control Recurrences RecipientsSchedules Go to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingAxis M1143-L System Options System OptionsSecurity UsersGo to System Options Security Https IeeeCertiﬁcates Go to System Options Security Certiﬁcates Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsScripting Reset to Factory Default SettingsFile Upload Plain ConﬁgTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Status and Network indicator LEDs are ﬂashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Video Camera Settings Video and image problems, generalProblems uploading ﬁles No images displayed on webMotion Detection triggers unexpectedly Storage and disk management problemsTechnical Speciﬁcations Technical SpeciﬁcationsMaintenance General Casing Function/group Speciﬁcations InstallationPower ConnectorsPerformance Considerations

Related manuals

Manual 87 pages 11.7 Kb