Axis Communications axis user manual Hardware Overview, Connectors

AXIS M1143–L

Hardware Overview

Hardware Overview

2 3

1

4 5 6 7 8 9 10

1.Lid

2.Focus puller

3.Zoom puller

4.microSD card slot

5.I/O connector

6.Network connector (PoE)

7.Network LED

8.Status LED

9.Power LED

10.Control button

Connectors

For technical specifications, see page 50.

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet (PoE).

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See Electromagnetic Compatibility (EMC) for regulatory requirements.

SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control button - The control button is used for:

4