Administrator’s Guide and Operating Instructions
Config – To configure (setup) the behaviors of the system.
Login – To login the system as Administrator, Supervisor or Operator.
Sequence Mode / Static Page Mode – To toggle between Sequence Mode and Static Page Mode. In Sequence Mode, each page in the designated sequence will be shown for its preset dwelling time sequentially. To select the Sequence, click on the Up/Down buttons beside the displayed sequence number. In Static Page Mode, the selected
Full Screen Display (Static Page Mode)
Pause/Circulate – To toggle between Pause Mode and Circulate Mode for status indication.
Next Device – To change the status indication to next device while it’s in Pause Mode.
Hard Disk Storage Indicator – To indicate the storage status of the current recording hard disk. There are 3 different colors:
GREEN – Normal, the remaining storage is more than 1 GB, YELLOW – Warning, the remaining storage is below 1 GB, & RED – Alarm, the remaining storage is below 500 MB.
11