Administrator’s Guide and Operating Instructions
9. Remote Control
Through Local Network, Intranet, Internet or
Connecting the Remote PC and Server
Before you start, please verify the connection between EDR400 and the modem or network. The procedure for configuring a remote PC depends on the desired type of connection. The user can either dial directly into the server through modem, or connect over a network. You must obtain IP addresses for the remote PC and EDR400, please refer to Chapter 6.15 System Configurations for the details.
Remote View
After the Remote PC and EDR400 are connected, start your Web browser and enter the system IP address in the Location/Address field.
(Note.1)
Example:
http://61.218.36.254
The main page will be shown on the screen, enter the appropriate Login name and password, then click on the Submit button. (Note. 2)
The main control page will be shown as below.
49