EverFocus eDR400 operating instructions Administrator’s Guide and Operating Instructions

Page 31

Administrator’s Guide and Operating Instructions

!"Installed – Check this item if the selected Camera is installed. If the selected Camera is installed, all the items in the Behaviors For Each Camera are settable. The default setting is installed.

!"Recording Quality For All Cameras – The range is 0-10, with 0 the lowest (rough) quality, 10 the highest (fine) quality. The default value is 5 . Use the Up/Down arrow buttons to adjust the value.

!"Compression Method For All Cameras – MPEG (MPEG-1) or JPEG-CIF (JPEG), resolution – 352x240 for NTSC, 352x288 for PAL.

!"Enable Digital Watermark – Check to enable digital watermark. The system provides up to 64 positions to locate the digital watermark. Click on the Vertical Position and Horizontal Position items to select the desired location. For the vertical position, the number 0 ~ 7

is from up to down, for the horizontal position, the number 0 ~ 7 is from left to right.

!"Time Stamp – Click on the button for the Time Stamp setting menu. The system provides user options to select the font size, position and color of the time stamp on the playback image.

!"Enable Motion Detection – Check to enable motion detection for the selected Camera at the selected Time Type.

!"Motion Action – The corresponding Motion Action if motion detection enabled.

!"Video Loss Action – The corresponding Video Loss Action (always enabled).

!"Normal Record (FPS) – The normal recording rate for the selected Camera at the selected Time Type. Use the Up/Down arrow buttons to adjust the value (0-30). The default value is 0.1 Frame Per Second (or 6 Frame Per Minute). (Note)

!"Alarm Record (FPS) – The alarm-recording rate for the selected Camera at the selected Time Type. Use the Up/Down arrow buttons to adjust the value (0-30). The default value is 5 Frame Per Second (or 300 Frame Per Minute).

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Administrator’s Guide Operating Instructions Administrator’s Guide and Operating Instructions Precautions Table of Contents Product Overview FeaturesVideo Input and Output Technical OverviewVideo Display Front & Rear Panels Rear PanelFront Panel Side Panel Before Installation System InstallationOptional Connections Basic ConnectionsIsdn Main Screen Administrator’s Guide and Operating Instructions Administrator’s Guide and Operating Instructions Basic Operations & Log Display Version Display Alarm Message DisplaySetup Administrator Operations Time Type SetupDay Type Setup Calendar Setup Alarm Action Setup Administrator’s Guide and Operating Instructions Administrator’s Guide and Operating Instructions Motion Action Setup Video Loss Action Setup Hard Disk Full Action Setup Administrator’s Guide and Operating Instructions Camera Setup Administrator’s Guide and Operating Instructions Administrator’s Guide and Operating Instructions Alarm In Setup Administrator’s Guide and Operating Instructions Alarm Out Setup Display Sequence Setup Display Page Setup Administrator’s Guide and Operating Instructions Motion Setup Administrator’s Guide and Operating Instructions Password Setup System Configurations Administrator’s Guide and Operating Instructions Msa.hinet.net25 Adm@everfocus.com.tw Administrator’s Guide and Operating Instructions Date/Time Setup Administrator Image Playback and Archive Administrator, Supervisor Administrator’s Guide and Operating Instructions Administrator’s Guide and Operating Instructions Select HDD & Range Dialog Box Administrator’s Guide and Operating Instructions To search by time, the diagram will be shown as below Connecting the Remote PC and Server Remote Control Upper Panel Administrator’s Guide and Operating Instructions HTTP, SMTP, TCP/IP, ICMP, ARP Appendix a SpecificationsNtsc Jpeg Appendix B Time Lapse Mode Recording TimePAL Jpeg Appendix D Q & a Appendix C Simulated KeyboardAdministrator’s Guide and Operating Instructions EverFocus
Top Page Image Contents