Administrator’s Guide and Operating Instructions
6.6 Video Loss Action Setup
The Video Loss Actions allow the administrator to define how the digital video recorder responds to the detected video loss for the cameras. There are up to 4 Video Loss Actions that correspond to 4 Alarm Outputs for most applications. The Focus Camera is always the camera with the detected video Loss. For each Video Loss Action, you may configure its behaviors as shown on the screen and described below.
Operations:
After the VLoss Action menu item is selected, the Video Loss
Action Setup dialog box will be shown on the screen.
VLoss A01 | 30 |
|
Corresponding camera
VLoss A01
VLoss A0205
VLoss A03
VLoss A04
Alarm 01
Please click on the item in the Action List, then click on the Action Tag, and then enter the new tag name for the selected Action by using the mouse or the keyboard. All the other settings correspond to the selected Action shown in the Action Tag. Please refer to the Alarm Action Setup for the descriptions and operations, except the followings:
!"There is no
notification because the video is lost. There will be only the notification indicate the triggered event.
23