Page 12 | AXIS 262+ Installation Guide |
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory Default settings and format the hard disk drive:
1.Press the Factory Setup button on the rear of the unit for 20 seconds while the unit is powered up.
2.When the Status indicator on the front panel displays steady green, which can take up to 3 minutes, the AXIS 262+ has been reset to the factory default settings.
3.
It is also possible to reset parameters to the original factory default settings via the Web interface. For more information, see the online help or the user’s manual.
Important!
Resetting the AXIS 262+ to the factory default settings will also erase all recorded video. If you have recorded video you wish to save, download it from the download tab on the Main View page, before resetting the unit.
Further information
The user’s manual is available from the Axis Web site at www.axis.com or from the Axis Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS 262+. To see the currently installed firmware version, see the Basic Configuration Web page in the product’s setup tools.