AXIS 262+ Installation Guide | Page 7 |
Set the password
When accessing the AXIS 262+ for the first time, the ‘Configure Root Password’ dialog will be displayed.
1.Enter a password and then
2.Enter the user name root in the ‘Enter Network Password’ dialog.
Note: The default administrator user name root cannot be deleted.
3.Enter the password as set above, and click OK. If the password is lost, the AXIS 262+
must be reset to the factory default settings. See page 11.
4.Enter the same user name and password for the video login and click OK.
5.If required, click Yes to install AXIS 262 Commander, which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this.
The Main View page of the AXIS 262+ is displayed, with links to the Setup tools which allow you to customize the video recorder.
ENGLISH
Setup - Provides all the tools for config- uring the video recorder to requirements.
Help - Displays online help on all aspects of using the video recorder.
Note that the Main View page shown here is an example only. The first time the AXIS 262+ is accessed there will be no video sources available - these must be added first.