Approach Tech DVR-3024 Updating System Software, Mode Key Result Display Live Quad Record CH1

Page 15

Mode

Key

Result Display

Live /

Quad

 

Record

(

)

 

CH1/

( Single channel )

 

CH2/

 

 

CH3/

 

 

CH4

 

 

Seq./

 

 

Save

then loop back

Playback

Quad

 

 

(

)

 

CH1/

( Single channel )

 

CH2/

 

 

CH3/

 

 

CH4

 

2.4 Updating System Software

Please take the following steps to safely update it.

1.Turn off the DVR.

2.Insert the SD card into the built-in SD slot of the unit.

3.Hold down the Up 12 and Down 13 buttons simultaneously, and then turn on the unit.

4.Keep holding down the buttons until the DVR sounds a tone and displays the message “ XXXXXX BYTES READ”. Now the DVR is updating the system software, which will take approximately 90 seconds to process.

5.Restart the unit when the device sounds a tone twice and displays the message “PLEASE RESTART”. The process is complete.

(If you have already followed the procedures 1~5, and the unit is still unable to switch on, please first check if the SD card you are using is functioning and the file is intact. And then start procedures 1

~5 all over again.)

6.Verify the version of the system software. (Please refer to the section 4.6 VERSION option.)

!Caution:

1.Before carrying out the updating procedures, please ensure the SD card is working and the file of the system software is intact.

2.Don’t interrupt the process while the unit is updating itself, as this would cause the unit to hang on.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation Page HDD Safety PrecautionsContents Product Features IntroductionProduct Introduction Front View Front / Rear ViewEnter / Quad button Rec IndicatorDisk Indicator Up / Down CH4 / CH3 buttonsJog Dial Power IndicatorMobile Rack Power LED Shuttle RingRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutAttaching AN External Device to DVR InstallationConnecting with 1 to 4 Cameras Basic ConnectionLocation Jumper Hard-disk Drive InstallationMaxtor Western DigitalSamsung 20 F/S System Information and Channel Selection01- 01-2005 +2 59G 12.4 HRCH4 Mode Key Result Display Live Quad Record CH1Updating System Software CH2 CH3Ntsc Audio on 11KHz Configuring Recording SettingsOperations Ntsc Audio OFFRefresh Rate Frame/Sec OperationsPAL Audio OFF PAL Audio on 11KHzMain Menu Timer RecordingRecording Operations Manual RecordingAlarm / Motion Recording MotionSet ALM Operation to ON/ OFF Externally Triggered Recording Slow Forward/Reverse Playback OperationsNormal Playback Fast Forward/BackwardPlay back Picture-by-picture Picture in Picture PinP Display ModeTime Search Alarm List SearchSearch Operations Full List SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlyBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Then set HD 2 Usage to Backup Set HD 2 to Backup first. Take the following stepsArchive Single image Clips into an SD Card SD Card Backup Operations for Removable HDD ModelSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI clips into an SD cardSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI System Backup the System setting info into an SD cardKey Lock Operation Updating System SoftwareREC Setting Menu SetupAudio Alarm / Motion SettingREC Quality Disk FullALM Duration PRE- Alarm30F/S 30 fields per second, 15F/S, 10F/S ALM TypeClock Timer / SEQ / Title SettingMotion Setting SENSITIVITY1 ~Sequencer Communication SettingREC Enable TimerBaud NET EnableFTP Setting Comm IDDisk Setting System Setting Buzzer OSD LanguageOperation LOG Menu BackgndVersion Setup PWDDefault SD SetupNetwork Configuration NetworkCable Connections Configure Your DVR Network Settings NetworkPIN no Mask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Select Internet Protocol TCP/IP Click Start → Control Panel →Network.Connections → Local Area ConnectionClick Start → Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】：You can Operation Remote ControlRemote play and PTZ control ※ Capture / Print Print Click the Print Preview buttonScroll the Original Image Size from Remind the condition of recordingRemote play Change Pan/Tilt/Zoom Setting【Backup up to AVI】： 【Backup to JPG】：【Edit AVI】： Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting Miscellaneous RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup General Command FormatDEC HEX Description of System State REC ModeNon REC Mode Request State Second Category=0x06Built-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Page Enter System DefaultD Message Meanings O.S.D MessagePoint stops recording Previously recorded data remaining Time Index TableHD1 12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04Model Number DVR-3024 DVR-3024D SpecificationsScanIP Page Ejecting The Disc Appendix 1. Using CD DiscsFor CD-RW Model only Inserting DiscRMN040200310V3.4

DVR-3024 specifications

The Approach Tech DVR-3024 is a cutting-edge digital video recorder that excels in providing high-quality surveillance solutions for both residential and commercial applications. Packed with advanced technologies and features, it sets a new standard in video security systems.

One of the standout features of the DVR-3024 is its impressive video recording capabilities. Supporting up to 24 channels, this device allows users to monitor multiple areas simultaneously, ensuring comprehensive coverage of any environment. Each channel can record in high-definition, with resolutions reaching up to 1080p, which guarantees crystal-clear video footage. The DVR utilizes H.264 video compression technology, which not only preserves the quality of the recordings but also optimizes storage space, allowing for longer retention periods without compromising on video quality.

Another significant characteristic of the DVR-3024 is its robust storage options. The device can accommodate large capacity hard drives, enabling extended recording times. Users have the flexibility to configure storage settings based on their specific needs, whether they require continuous recording or motion-detection recording for efficient space management.

Networking capabilities are another critical aspect of the DVR-3024. With built-in Ethernet support, users can remotely access their surveillance feeds from anywhere in the world. This real-time viewing feature is particularly useful for business owners who want to keep an eye on their premises or for homeowners monitoring their property while away. Additionally, the DVR can send alerts and notifications directly to users via mobile devices, enhancing security responsiveness.

The user interface of the DVR-3024 is designed with simplicity in mind. It includes an intuitive menu system that makes navigating through settings and retrieved footage seamless, even for those with limited technical expertise. Furthermore, the device supports multiple output formats, including HDMI and VGA, allowing for versatile integration with display systems.

The Approach Tech DVR-3024 is not just about recording; it also includes advanced playback features. Users can easily search for specific footage through various filtering options, such as date and time, making it efficient to retrieve critical information when needed.

In summary, the Approach Tech DVR-3024 emerges as a powerful surveillance tool, combining high-definition recording, expansive storage, real-time access, and user-friendly features. Whether safeguarding a home or a business, the DVR-3024 proves to be an invaluable asset in enhancing security measures.
Top Page Image Contents