on the last Sunday of March. Time reverts to standard time at 1:00 a.m. on the last Sunday on October.
SET: Sets the beginning and ending for the daylight saving time.
REC ENABLE:
This option enables/disables the programmed scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER:
This entry allows users to program the time each day when the DVR will start and stop recording. There are 2 time periods each day available for scheduling. The time is displayed in a
REC SCHEDULE
START END START END
S00:00- 00:00 00:00- 00:00
M00:00- 00:00 00:00- 00:00 T 00:00- 00:00 00:00- 00:00 W 00:00- 00:00 00:00- 00:00
T 00:00- 00:00 00:00- 00:00
F00:00- 00:00 00:00- 00:00 S 00:00- 00:00 00:00- 00:00
OK CANCEL
TO MOVE 
TO CHANGE
SEQUENCER:
This entry allows users to set the DWELL time (time interval) for CH1, CH2, CH3, CH4, and quad view(
). The valid values are 01
~99 seconds; if the dwell time is set to 00, it will disable the corresponding channels, while the sequential jumping is proceeding. In the live mode, press the Seq./Save button to switch the screen to the sequential
jumping is proceed. In live mode, press the Seq./Save button to switch the screen to the sequential jumping mode.
SEQUENCER
CHANNEL 1 2 3 4
DWELL | 03 | 03 03 03 03 |
TITLE:
This entry allows users to set the titles for each video source or camera, in live or recording mode. Press the DISPLAY button to switch the display status and show the titles. The maximum length for each title is 24.
TITLE
CH1 | [ FRONT DOOR | ] |
CH2 | [ KITCHEN | ] |
CH3 | [ BACKYARD | ] |
CH4 | [ ROOM | ] |
TO MOVE 
TO CHANGE
4.4 COMMUNICATION Setting
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
This option allows you to configure the status of the
34