Approach Tech DVR-3024 manual OSD Language, Operation LOG, Menu Backgnd, Buzzer, Situation

This page is used for accessing the history of the operation status, setting the password, resuming factory default, and determining the menu display background.

OSD LANGUAGE:

This option allows you to select the OSD language display as English or Chinese.

OPERATION LOG:

MAIN MENU

RECORD

ALARM / MOTION

CLOCK/ TIMER

COMMUNICATION

DISK

SYSTEM

GOTO SYSTEM PAGE

SYSTEM

MENU BACKGND:

There are 3 levels of background color transparencies you can choose from: level 1 is totally transparent, level 3 is opaque, and level 2 is between levels 1 and 3. The background color is used in the setup menu and the search functions.

LOG

05/15/04 18:19:30 ON 05/15/04 18:19:36 OFF 05/15/04 18:23:10 ON 05/15/04 18:23:50 REC 05/15/04 18:25:05 STOP 05/15/04 18:27:12 V-LOSS 05/15/04 18:50:30 PLAY 05/15/04 18:51:20 STOP-P

This log shows the history of your operations status, in chronological order. What the following entries represent is detailed below.

ON: Powers up the device.

OFF: Powers off the device.

REC: Starts recording.

STOP: Ceases recording.

STOP-P:Ceases playback.

PLAY: Shows recorded video.

V-IN:Video input is connected.

V-LOSS:Video loss occurs.

P-LOSS:Power interruption occurs.

A-IN:Detects an alarm input.

LOCK: Disables the entire front panel controls.

UNLOCK: Releases the key lock.

UPDATE: Updates system software.

Note: The log keeps history of the operations statues on a revolving basis because of a limit of 4000. When the log is full, the newly registered record of an operation will replace the existing records from the oldest one.

38

BUZZER:

This option determines the embedded buzzer will sound a tone to signal the following situations. A tone lasts about two seconds long.

ON: Enables buzzer.

OFF: Disables buzzer.

Situation

Alarm occurs

Video loss occurs

Disk is full

Load factory default

Buzzer set to ON

Enable/disable key lock function

Power on /off mobile rack HDD

Backup operation complete

Timer activate/deactivate

Recording switching between HDDs

PASSWORD:

This option allows you to set a password to prevent any unauthorized re-formatting of the hard disk drives or use by the Viewer Software. The standard password is “9999”.

OLD PASSWORD: Enter the pre-set password (or the standard password if this is the initial setting) to access the password setting system.

NEW PASSWORD: Enter a 4-digit-number password of your choosing which will replace the pre-set password (or the standard password “9999”).