Approach Tech DVR-3024 manual Alarm / Motion Recording, Set ALM Operation to ON/ OFF

(8)Press the REC button 6 for 3 seconds during the scheduled recording to stop it any time. If you wish to continue the scheduled

recording, press the REC button 6 to proceed.

Note: You can proceed to start the scheduled recording from the current time if it is in the scheduled interlude as soon as setting is completed, and come out from the menu to start recording.

Note: If you activate the recording function before the scheduled recording, the unit will operate recording as shown in the diagram below and keep those Images in different files.

3.2.3 Alarm / Motion Recording

Take the following steps to activate the programmed alarm recording. For the ALM

OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARM settings, please refer to section

4.2for more details.

(1)Press the Setup button 9 to enter the

MAIN MENU.

(2)Select ALARM / MOTION and press the Enter button 15 to enter the ALARM /

MOTION.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION settings for use. If audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARMto ON.

(4)To activate/deactivate the alarm recording,

17

set ALM OPERATION to ON/ OFF.

MAIN MENU

RECORD

ALARM / MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO ALARM/ MOTION PAGE

ALARM/ MOTION

(5)To active the motion alarm recording, select MOTION SETTING and press the Enter button 15 to enter the MOTION SETTING page, set MOTION ENABLE TO ON, and set a suitable SENSITIVITY and REGION according to the video sources.

MOTION SETTING

MAIN PAGE