5.2.3.5 Viewer setting
1."Channel Notation".
If you wish to change the "Display Mode", open its drop - down list and select any of the four items there. Your choice will automatically appear in the relevant blank space. Similarly you can enter the "Fill Color" and "Border Color" entries to open their respective color tables. Click "OK" in each case to set your choice.
2."Playback Record Time".
Click the "Display Mode" to select from a drop - down list of two choices, "Hide" and "Show". Your choice will decide whether the images will display their date and time or not.
3."Auto Scan Interval".
Here you have two entries, "Scan Working Devices" and "Scan Available Devices". Set the time in seconds for both entries as per your requirements. The "Scan Working Devices" entry has a time span of 1 to 5 seconds only. The "Scan Available Devices " time range covers 30 to 1000 seconds.
4."Users Management".
Click the "Save User" button to add the new user’s name and password under "Add New User": Enter the "User Name" and "Password" and click "Save User " again. Your new user and his password will appear on the "User Name & Password " list to the left. If you proceed to enter a new user and then click "Cancel Edit", no new name will be added to your list. If you wish to delete any user, click his name and click "Delete" to effect the change.
5.3 Microsoft Internet Explorer
This section provides instructions for using the Microsoft Internet Explorer.
5.3.1 Connecting the DVR
Start up the Microsoft Internet Explorer, and then follow the steps given below to connect the DVR:
53
1.Type in the URL address of the DVR into the URL block and press the “Enter” button to enter the login page. The default user name and password are admin and 9999 respectively.
2.Enter the User name and Password.
3.Click the “Login” button and enter the home page of the DVR: both the user name and password must be provided correctly.