Approach Tech DVR-3024 manual Safety Precautions, Hdd

Page 3

SAFETY PRECAUTIONS

All the following safety and operated instructions which will prevent harm or damage to the operator and other persons should be read before the unit is operated.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference with radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING

!To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

!Do not block ventilation openings.

!Do not place anything on top of the unit that might spill or fall into it.

!Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Please refer all servicing to qualified service personnel.

!Do not use liquid cleaners or aerosols for cleaning.

!This installation should be by a qualified service person and should conform to all local codes.

To prevent fire or electric shock, do not overload wall outlets or extension cords. This unit must be grounded to reduce the risk of electric shock hazard.

CAUTION

!HDD:

Please don’t use the hard disk(s) you have employed with a particular model of the DVR (in recording and playing back data) with any other model of DVR, for you will lose the data you have stored in the hard disk(s) if you do so. You are free to use the same hard disks between DVRs belonging to a single model.

!Danger of explosion if battery( RTC Battery ) is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

!Risk of explosion if replaced by an incorrect type. Dispose of used batteries according to the instructions.

1

Image 3 Contents
Installation Page HDD Safety PrecautionsContents Product Features IntroductionProduct Introduction Front View Front / Rear ViewEnter / Quad button Rec IndicatorDisk Indicator Up / Down CH4 / CH3 buttonsJog Dial Power IndicatorMobile Rack Power LED Shuttle RingRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutAttaching AN External Device to DVR InstallationConnecting with 1 to 4 Cameras Basic ConnectionLocation Jumper Hard-disk Drive InstallationMaxtor Western DigitalSamsung 20 F/S System Information and Channel Selection01- 01-2005 +2 59G 12.4 HRCH4 Mode Key Result Display Live Quad Record CH1Updating System Software CH2 CH3Ntsc Audio on 11KHz Configuring Recording SettingsOperations Ntsc Audio OFFRefresh Rate Frame/Sec OperationsPAL Audio OFF PAL Audio on 11KHzMain Menu Timer RecordingRecording Operations Manual RecordingAlarm / Motion Recording MotionSet ALM Operation to ON/ OFF Externally Triggered Recording Slow Forward/Reverse Playback OperationsNormal Playback Fast Forward/BackwardPlay back Picture-by-picture Picture in Picture PinP Display ModeTime Search Alarm List SearchSearch Operations Full List SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlyBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Then set HD 2 Usage to Backup Set HD 2 to Backup first. Take the following stepsArchive Single image Clips into an SD Card SD Card Backup Operations for Removable HDD ModelSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI clips into an SD cardSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI System Backup the System setting info into an SD cardKey Lock Operation Updating System SoftwareREC Setting Menu SetupAudio Alarm / Motion SettingREC Quality Disk FullALM Duration PRE- Alarm30F/S 30 fields per second, 15F/S, 10F/S ALM TypeClock Timer / SEQ / Title SettingMotion Setting SENSITIVITY1 ~Sequencer Communication SettingREC Enable TimerBaud NET EnableFTP Setting Comm IDDisk Setting System Setting Buzzer OSD LanguageOperation LOG Menu BackgndVersion Setup PWDDefault SD SetupNetwork Configuration NetworkCable Connections Configure Your DVR Network Settings NetworkPIN no Mask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Select Internet Protocol TCP/IP Click Start → Control Panel →Network.Connections → Local Area ConnectionClick Start → Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】:You can Operation Remote ControlRemote play and PTZ control ※ Capture / Print Print Click the Print Preview buttonScroll the Original Image Size from Remind the condition of recordingRemote play Change Pan/Tilt/Zoom Setting【Backup up to AVI】: 【Backup to JPG】:【Edit AVI】: Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting Miscellaneous RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup General Command FormatDEC HEX Description of System State REC ModeNon REC Mode Request State Second Category=0x06Built-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Page Enter System DefaultD Message Meanings O.S.D MessagePoint stops recording Previously recorded data remaining Time Index TableHD1 12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04Model Number DVR-3024 DVR-3024D SpecificationsScanIP Page Ejecting The Disc Appendix 1. Using CD DiscsFor CD-RW Model only Inserting DiscRMN040200310V3.4