Approach Tech DVR-3024 manual Remote play, Change Pan/Tilt/Zoom Setting

5.2.3.2.1 Remote play

This device has the full triplex so you can use the Viewer Software in the remote without affecting the performance of the 4 - channel DVR. You can also use the Viewer Software to play and back up. If you have a PTZ camera, the Viewer Software can also control it.

“Play": Click it to see the DVR play window. Use the "Previous page" and "Next page" buttons to find the record you want from the record list. Click the "Time Search" page to use the time and date search entries to help your search.

"Pause": Click to freeze the image.

"Stop": Click to stop playing back the recorded video.

"REC": Click to control the recording of the DVR. Press the button to start or stop the recording.

"REV": Click to play a recorded video in the reverse direction at speeds, which are faster than the recorded speed.

"FWD": Click to play a recorded video in the forward direction at speeds, which are faster than the recorded speed.

stopping, in one of the four designated directions. The fifth button, in the center, will stop the camera at any point you prefer.

The left-hand set of buttons,, has

four buttons, each of which, upon being clicked, will move one short step only in any of the four designated directions.

3.Select a Speed Dome device Model from the drop-down list on the Speed Dome Controller. The

Controller will be able to display the listed Models by turn.

4.Select a Speed Dome device ID from the drop-down list on the Speed Dome Controller. The Controller will

be able to display the listed IDs by turn.

5.

5.2.3.2.2 Change Pan/Tilt/Zoom Setting

Click the button on the home page to open the Speed Dome Controller.

1.Click the button to control the Zoom setting on the Speed Dome Controller.

2.The right-hand set, , has four buttons, each of which, upon being clicked, will turn the camera all the way, without

50

Each of the ten buttons under ‘Set’ is connected with a specific position and angle of either panning or tilting of the camera. Click each button to activate its particular position and angle. Press the button under ‘Preset‘ to turn the camera angle by angle in the set positions.

Each of the ten buttons under ‘Clear’ can be clicked to delete the corresponding ‘Set’ button above it. For example, if you wish to de-activate ‘Set’ button #4, please click ‘Clear’ button #4 to delete its corresponding ‘Set’ counterpart.

Each of the ten buttons designated ‘Go to’ can be clicked to view the particular corresponding angle of the position in which it is set.