Approach Tech NVR-2018 manual Motion Detection

Page 23

4.2.4 Motion Detection

Take the steps detailed below to activate a programmed motion detection. For MOTION SETTING, as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION, please refer to section 5.4 for further details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select the item termed "LAN CAMERA" and press the Enter button to enter the LANCAM SETTING page.

(3)Select the item termed "MOTION" and push the Enter button to enter the MOTION SETTING page.

(4)To activate the motion detection function, set "MOTION ENABLE" to "ON". To deactivate the function, set "MOTION ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the channels in the MOTION ENABLE SETTING page off and on respectively as well. If you wish to select individual channels for viewing, select the item termed " SET" and activates your desired channels by pressing them "ON" while turning the rest "OFF". Confirm your choices by pressing "OK". If not, push "CANCEL".

(5)In the MOTION SETTING page, select the entry termed "SENSITIVITY / REGION" and press the “>” button to show all the channels in their order, each in turn. Use the “^” button and the “v” button to select a desired channel for setting. Press the Enter button and set the channel in the SENSITIVITY / REGION SETTING page. Repeat the process for all other channels you choose.

(6)To set "SENSITIVITY" and "REGION" for activation on the SENSITIVITY / REGION page, choose your degree of sensitivity and then push the Enter button . At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button and the “>” button to confirm either "OK" or "CANCEL" respectively.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Installation Operating Manual Page Safety Precautions Table Of Contents RS-232 Protocol Product Introduction Product FeaturesPage Hard disk compartment lock Front ViewHard-disk drive compartment Up / Down CH4-CH8 /CH3-CH7 buttons Setup/Save buttonRec Indicator Left / Right CH1-CH5 /CH2-CH6 buttonsShuttle Ring Disk IndicatorPower Indicator Mobile Rack Power LEDRear View No Connection Alarm In/OutThis Figure is Looked from the Rear View Basic Connection Connecting with a Single CameraLANCAM, NVR, ROUTER, Connection Structure LAN CameraMaxtor Hard-Disk Drive InstallationSeagate System Information Updating System Software 720 X Audio OFF Configuring Recording Settings352 X Audio OFF Manual Recording Timer RecordingRecording Operations Start END 0000-0000 0000-0000 M 0000-0000 W0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 30 SEC Alarm RecordingMAX REC Rate Unlimit PRE- Alarm OFF Main Alarm REC Enable Motion Detection Sensitivity Highest Region 30, 25 90 Externally triggered Recording Diagrams belowREC → 〔STOP 〕 → Operation Status From REC mode to Playback modePlayback Operations Fast Forward/ReversePlay Back Recorded Video from a HDD of the mobile rack Slow Forward/ReversePlay Back Picture-by-picture Full List Search Alarm list SearchSearch Full List Alarm List Time Search Thumbnail SD Card Search OperationsDD MM Year HH MM 24 / 12 / 2003 00 Time SearchThumbnail Search 2003 Alarm List Time Search Channel ： Thumbnail SD CardSD Card Search Search Thumbnail Year Full ListAlarm Select Main Backup ALL Backup OperationsMobile Rack HD Backup Operations Backup Backup Main EXT Disk SET to Backup1220 2001-02-01 0330 2001-03-02 0420 1330 Alarm Select Main Backup AlarmDisk Setting Reformat HD2 Usage Search buttonSave to J0000.JPG Save to J0001.JPG Save to J000N.JPG Secure Digital Card SD Card Backup OperationsKey Lock Operation Menu Setup Title Login NameQuality Setting CH1 CH2 CH3 CH4 Quality Highest Lancam SET Image Resolution Image SettingResolution Setting CH1 CH2 CH3 CH4 Image Setting Quality Highest Medium LOW Lowest SET LancamImage SET Audio ON/OFF Individually Sensitivity Highest Region 30, 25 90 REC Setting Bandwidth 10F/S0600-1800 0000-0000 TimerREC Schedule Timer Enable on 1200-1800MAX REC Rate Unlimit PRE- Alarm Main Alarm REC Enable Alarm SettingMAX REC Rate Main SET Network RS232RS-232 Main SET IP Pool Range Comm ID IP Pool Range Setting192.168 ― 192.168 REC HD Backup Full Main Disk REFORMAT/CLEARBackup HD HD2 Usage HD BackupSystem Setting Situation From the oldest oneMAC 00 0c 0c 00 00 Bios Date Dec 24 Communication Protocol SetupGeneral Command Format Value of a specific front panel key Statedhcpwait Statesearch Statebackup Built-in hard disk Jumper settings of hard-disk drives for the system LocationMobile Rack Page Page D Message Meanings PIN no Network ViewerInstall the Network Viewer for the ZIP file View the NVR video from a remote PC Page Function Buttons Description Page Change the Record & Timer Properties Via the Network Set the Record Schedule Set the regular record settingsSet the Alarm record settings Archive Images to the Computer Image Viewer Point stops recording Previously recorded data remaining 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03Connect to a LAN Hub Intranet Physical specification of RJ-45 cable for EthernetCable Connections Connect to a computerConnect to WAN Internet RJ-45 PIN configuration for LAN HubConfigure Your NVR Network Settings Enable Dhcp FunctionSet IP Address 11.3 TCP/IP Communication Software 11.4 TCP/IP installation Click Start Programs MS-DOS Prompt 11.5 TCP/IP Configuration settingConnection Testing Click Start Settings Control Panel NetworkPage Browsing images from the NVR-2018 Connecting the NVR-2018Description of functional keys Function Buttons Description Page Change Lancam Setup Setting Change Record / Alarm Setting Change Timer Record Setting Model Number 8CH NVR-2018 Design and specifications subject to change without noticeAppendix 1. -SCANIP

NVR-2018 specifications

The Approach Tech NVR-2018 is a state-of-the-art network video recorder designed to meet the demands of modern surveillance systems. With advancements in technology and an emphasis on usability, this NVR serves as a reliable solution for both home and business security needs.

One of the standout features of the NVR-2018 is its high-capacity storage capability. Equipped with support for multiple hard drives, it can accommodate a substantial amount of video footage without compromising performance. Users can opt for various RAID configurations that ensure data redundancy and reliability. This is crucial for environments where continuous monitoring is essential.

Another significant characteristic is the device’s compatibility with a wide array of IP cameras. The NVR-2018 supports various resolutions, including 4MP, 5MP, and even 4K, allowing users to choose the optimum quality for their specific needs. The device incorporates advanced H.265 video compression technology, enabling efficient storage management while maintaining high-quality video output. This not only helps save storage space but also enhances streaming performance, reducing latency and buffering.

Additionally, the Approach Tech NVR-2018 features intelligent video analytics, which can provide users with actionable insights. These features include motion detection, line crossing detection, and facial recognition, making it easier to monitor activities and respond to incidents promptly. The flexibility of remote access through mobile applications and web browsers further enhances usability, allowing users to view live footage and recorded events from anywhere in the world.

The user interface is designed for ease of use, featuring a streamlined, intuitive dashboard that allows quick navigation through multiple camera feeds and settings. Integration with third-party software systems, such as alarm systems and access control, enables a comprehensive surveillance solution tailored to specific operational needs.

The NVR-2018 is built with robust security features to protect against unauthorized access and data breaches. Encryption protocols, user authentication, and automatic firmware updates ensure that the system remains secure and reliable.

Overall, the Approach Tech NVR-2018 combines cutting-edge technology, high-performance capabilities, and user-centric design to deliver a powerful surveillance solution for diverse applications. Its blend of storage capacity, camera compatibility, and intelligent analytics makes it a top choice for users seeking an effective method of monitoring and safeguarding their premises.
Top Page Image Contents