Approach Tech NVR-2018 manual RS232, Main SET Network

Page 46
OFF:
CLIENT:
SERVER:

5.5 COMMUNICATION

This option allows you to configure the status of the RS-232 communication port when connected to an external device, and the Ethernet communications settings. (Please refer to the RS-232 Protocol and Network Function for more details)

MAIN MENU

LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK

SYSTEM

GOTO COMM PAGE

NET IP:

COMM SETTING

NET IP

: SET

NET DHCP

: SERVER

LEASED IP TABLE

: ENTER

IP POOL RANGE

: SET

COMM ID

: 01

RS232

: ON

MAIN PAGE

 

SET NETWORK

 

This option is used to configure the Ethernet communication settings. This is required for the purpose of making a network connection. Please consult with a qualified MIS professional to configure it.

IP: XXX.YYY.ZZZ.WWW

MASK: XXX.XXX.XXX.XXX

GATEWAY: XXX.XXX.XXX.XXX

NET DHCP:

This option selects CLIENT, SERVER or OFF for the DHCP communication function. Disables it.

Disables it. Enables it.

NOTE: The range of available IP to be leased by DHCP server is from XXX.YYY.ZZZ.1 to XXX.YYY.ZZZ.254 except for NVR’s IP XXX.YYY.ZZZ.WWW.

NOTE: If provided with a DHCP server, the NVR-2018 can get an IP automatically by setting this option to CLIENT.

LEASED IP TABLE:

Show DHCP leased IP table.

44

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Installation Operating Manual Page Safety Precautions Table Of Contents RS-232 Protocol Product Features Product IntroductionPage Hard-disk drive compartment Front ViewHard disk compartment lock Left / Right CH1-CH5 /CH2-CH6 buttons Setup/Save buttonRec Indicator Up / Down CH4-CH8 /CH3-CH7 buttonsMobile Rack Power LED Disk IndicatorPower Indicator Shuttle RingRear View This Figure is Looked from the Rear View Alarm In/OutNo Connection Connecting with a Single Camera Basic ConnectionLAN Camera LANCAM, NVR, ROUTER, Connection StructureSeagate Hard-Disk Drive InstallationMaxtor System Information Updating System Software 352 X Audio OFF Configuring Recording Settings720 X Audio OFF Recording Operations Timer RecordingManual Recording Start END 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 M 0000-0000 W0000-0000 MAX REC Rate Unlimit PRE- Alarm OFF Main Alarm REC Enable Alarm Recording30 SEC Motion Detection Sensitivity Highest Region 30, 25 90 Diagrams below Externally triggered RecordingFast Forward/Reverse Operation Status From REC mode to Playback modePlayback Operations REC → 〔STOP 〕 →Play Back Picture-by-picture Slow Forward/ReversePlay Back Recorded Video from a HDD of the mobile rack Search Operations Alarm list SearchSearch Full List Alarm List Time Search Thumbnail SD Card Full List SearchThumbnail Search Time SearchDD MM Year HH MM 24 / 12 / 2003 00 Search Thumbnail Year Full List Alarm List Time Search Channel ： Thumbnail SD CardSD Card Search 2003Backup Backup Main EXT Disk SET to Backup Backup OperationsMobile Rack HD Backup Operations Alarm Select Main Backup ALLSearch button Alarm Select Main Backup AlarmDisk Setting Reformat HD2 Usage 1220 2001-02-01 0330 2001-03-02 0420 1330Secure Digital Card SD Card Backup Operations Save to J0000.JPG Save to J0001.JPG Save to J000N.JPGKey Lock Operation Menu Setup Login Name TitleImage Setting Quality Highest Medium LOW Lowest SET Lancam Quality Highest Lancam SET Image Resolution Image SettingResolution Setting CH1 CH2 CH3 CH4 Quality Setting CH1 CH2 CH3 CH4Image SET Audio ON/OFF Individually Sensitivity Highest Region 30, 25 90 REC Setting 10F/S Bandwidth1200-1800 TimerREC Schedule Timer Enable on 0600-1800 0000-0000Alarm Setting MAX REC Rate Unlimit PRE- Alarm Main Alarm REC EnableMAX REC Rate RS232 Main SET Network192.168 ― 192.168 Main SET IP Pool Range Comm ID IP Pool Range SettingRS-232 HD Backup HD Backup Full Main Disk REFORMAT/CLEARBackup HD HD2 Usage RECSystem Setting From the oldest one SituationMAC 00 0c 0c 00 00 Bios Date Dec 24 General Command Format SetupCommunication Protocol Value of a specific front panel key Statedhcpwait Statesearch Statebackup Jumper settings of hard-disk drives for the system Location Built-in hard diskMobile Rack Page Page D Message Meanings Network Viewer PIN noInstall the Network Viewer for the ZIP file View the NVR video from a remote PC Page Function Buttons Description Page Change the Record & Timer Properties Via the Network Set the Alarm record settings Set the regular record settingsSet the Record Schedule Archive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remainingConnect to a computer Physical specification of RJ-45 cable for EthernetCable Connections Connect to a LAN Hub IntranetEnable Dhcp Function RJ-45 PIN configuration for LAN HubConfigure Your NVR Network Settings Connect to WAN InternetSet IP Address 11.3 TCP/IP Communication Software 11.4 TCP/IP installation Click Start Settings Control Panel Network 11.5 TCP/IP Configuration settingConnection Testing Click Start Programs MS-DOS PromptPage Description of functional keys Connecting the NVR-2018Browsing images from the NVR-2018 Function Buttons Description Page Change Lancam Setup Setting Change Record / Alarm Setting Change Timer Record Setting Design and specifications subject to change without notice Model Number 8CH NVR-2018Appendix 1. -SCANIP

NVR-2018 specifications

The Approach Tech NVR-2018 is a state-of-the-art network video recorder designed to meet the demands of modern surveillance systems. With advancements in technology and an emphasis on usability, this NVR serves as a reliable solution for both home and business security needs.

One of the standout features of the NVR-2018 is its high-capacity storage capability. Equipped with support for multiple hard drives, it can accommodate a substantial amount of video footage without compromising performance. Users can opt for various RAID configurations that ensure data redundancy and reliability. This is crucial for environments where continuous monitoring is essential.

Another significant characteristic is the device’s compatibility with a wide array of IP cameras. The NVR-2018 supports various resolutions, including 4MP, 5MP, and even 4K, allowing users to choose the optimum quality for their specific needs. The device incorporates advanced H.265 video compression technology, enabling efficient storage management while maintaining high-quality video output. This not only helps save storage space but also enhances streaming performance, reducing latency and buffering.

Additionally, the Approach Tech NVR-2018 features intelligent video analytics, which can provide users with actionable insights. These features include motion detection, line crossing detection, and facial recognition, making it easier to monitor activities and respond to incidents promptly. The flexibility of remote access through mobile applications and web browsers further enhances usability, allowing users to view live footage and recorded events from anywhere in the world.

The user interface is designed for ease of use, featuring a streamlined, intuitive dashboard that allows quick navigation through multiple camera feeds and settings. Integration with third-party software systems, such as alarm systems and access control, enables a comprehensive surveillance solution tailored to specific operational needs.

The NVR-2018 is built with robust security features to protect against unauthorized access and data breaches. Encryption protocols, user authentication, and automatic firmware updates ensure that the system remains secure and reliable.

Overall, the Approach Tech NVR-2018 combines cutting-edge technology, high-performance capabilities, and user-centric design to deliver a powerful surveillance solution for diverse applications. Its blend of storage capacity, camera compatibility, and intelligent analytics makes it a top choice for users seeking an effective method of monitoring and safeguarding their premises.
Top Page Image Contents