3.1. Record General
1.The menus are displayed with options in the
buttons [ 
] .
2.Change the options shown below using the [DEC/INC] buttons.
1)Schedule Use: This enables or disables Night Zone. By default “OFF”.
2)Boot up Record: The DVR starts recording without pressing the [REC] button when it is set to “ON”.
3)Disk Overwrite: Selects the record policy of the hard disk drive.
-ON: By default, the hard disk drive overwrites from the beginning when it becomes full.
-OFF: Stops recording when the HDD is full.
4)Auto Delete: Allows you to configure when the DVR automatically deletes all data from HDD. It leaves the data for a selected duration from the current time. [NONE 12HOURS 1DAY~ 6DAYS 1WEEK ~
5)
6)Post- Record: Determines the duration the DVR continues to record for after an Event detection [5SEC ~ 300 SEC]. By default 5 sec.
<Note> 1. Alarm/Motion Duration is extended if there is another Alarm/Motion detected whilst Event Recording.
2.When recording, the
3.To save changes and exit the menu, press the [MENU] button.
To exit the menu without making changes, press the [CANCEL] button.
<Approximate File Size>
39