4. Zooming
During live view mode, it is possible to zoom into a section of the screen to get a
1.To activate the digital zoom, select the full screen display of the camera you wish to zoom.
2.Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, as shown below: x2
x 2
3.Move the box to the desired position using Direction [ 
] buttons.
4.Press [CANCEL] button to return normal mode.
<Note>
This function is limited while it’s playback in this model.
If the Zoom button is pressed while in a multiscreen display, zoom operation is not activated.
27