<Note> 1) Log list is saved on HDD.
2) For more detailed information press
4. Log List Search
The logs can be used to search, and to review, any point in time of the recorded data. Alarm, Motion, Video Loss and system related logs can be searched and played back directly from the time of the incident.
.To start an Event Search, press the 
[Log] button on the IR Remote and the Log List Menu pops up, as shown below.
MENU TAB | CONDITION |
ALL | A list of all events since the initial DVR power on procedure. |
|
|
SYSTEM | Shows the System List. |
|
|
NETWORK | Shows the NETWORK List. |
|
|
EVENT | Shows the Events List. |
|
|
VIDEO LOSS | Shows Video Loss List. |
|
|
2.Use the Up/Down buttons [] to the desired “Time” to playback. Use the Left/Right buttons [] to move to the NEXT page.
3.Press the [ENTER] button to start playback.
85