|
|
7.3. PTZ EVENT
When an Alarm is triggered, Motion detected or Video Loss occurs, this DVR sends a preset command to a PTZ camera. The PTZ option must be enabled and a protocol must be assigned to the camera channel.
1.Channel: Select desired PTZ camera.
2.Active: Configure PTZ action [ NONE GOTO TOUR ] and Preset number or Tour group when an event is detected.
3. | Inactive: | Select Camera position after the event duration expires. | |
4. | Event | Edit. |
|
| Press [enter] to edit multiple events. The menus are displayed with options in the left- | ||
| hand column and settings in the right hand column. A cursor (highlighted menu) can | ||
| be moved using the directional buttons [ | ] on the IR remote or front panel. | |
<Note> Do NOT set up Motion detection on the PTZ camera used for a PTZ event. The signal will be looped.
5 . Save changes and exit the menu, press the [MENU] button.
Exit the menu without making changes, press the [CANCEL] button.
67