NOTE 1 Do not switch OFF or PRESS any key during the update process.
NOTE 2 Please consult your distributor or installer before update this DVR.
5.Use the directional buttons to move to the [Start] button, then press [+] button to start updating.
While updating, an ”in progress” message is displayed.
6.After the update process is complete, a “Success” message is displayed. Press the [+] button to restart. The DVR issues a single beep, if Micom update is included.
8.5. INFO
System information contains brief model information, Mac Address and installed HDD status.
.
Press the info button on the remote control or front panel. The system information is displayed. Use the directional button to move to the next page.
73