Giantec tracer2000 manual Chapter Cmos Setting, Introduction, Setup Pages

tracer2000 Network DVR Hardware User’s Manual

Chapter V CMOS Setting

1.Introduction

This manual discusses AwardTM setup program built into the ROM BIOS. The setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed RAM so that it retains the setup information when the power is turned off.

If system behaviors abnormal situation and you wish to check hardware values of CMOS, you may connect a USB keyboard, restart the system by turning it OFF then ON or pressing the “RESET” button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. Press <Delete> key to enter CMOS setting pages.

2.Setup Pages

Phoenix-Award BIOS CMOS Setup Utility.

Standard CMOS Feature		Frequency / Voltage Control
Advanced BIOS Feature		Load Optimized Defaults
Advanced Chipset Feature		Set Supervisor Password
Integrated Peripherals		Set User Password
Power Management Setup		Save & Exit Setup
PnP / PCI Configurations		Exit Without Saving
PC Health Status
Esc: Quit	F9: Menu in BIOS		↑ ↓ ← →: Select Item
F10: Save & Exit Setup
	Time, Date, Hard Disk Type.

Version 3.1 Page 19 of 31