tracer2000 Network DVR Hardware User’s Manual
2.8Frequency / Voltage Control
Use this menu to specify your settings for frequency / voltage control.
Auto Detect DIMM / PCI CLK | Enabled |
Spread Spectrum | Disabled |
Item Help
Menu Level ¾
↑↓←→Move | Enter: Select | |
F10: Save | ESC: Exit | F1: General Help |
F5: Previous Values | F6: | F7: Optimized Defaults |
2.9Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for optimal performance system operations. While Award has designed the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs.
Load Optimized Defaults (Y/N)? N
Pressing “Y” loads the default values that are factory settings for optimal performance system operations.
2.10Supervisor / User Password
Use this menu to set User and Supervisor Passwords.
2.11Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
2.12Exit Without Save
Abandon all CMOS value changes and exit setup.
Version 3.1 | Page 27 of 31 |