Maxtor manual Selecting ELX8-60, Operable range of remote controller

ELX8 -60 INSTALLATION AND CONNECTION

(4)Select “Remote Control ID,” and press the [ENETR] button.

(5)Select a value using the [ ￿ ￿ / ￿ ￿ ] buttons and press the [EXIT] button.

(6)Press the [EXIT] button toexit the Settings Page and return to Monitor mode.

<Note> Remote Control ID

Up to 16 ELX8-60s can be controlled with a single remote controller.

6.3. Selecting ELX8-60

If several ELX8-60s are set with unique ID numbers, they can be controlled with one remote controller. To select a specific ELX8-60, press the ID button of remote controller until the 8 LEDs on the front of the ELX8-60 light up and a buzzer sounds.

<Note>

Because remote controller ID is sixteen, ELX8-60 will correspond.

6.4. Operable range of remote controller

18 2003. 08. 13 (v 1.0) Rugged CCTV