Maxtor ELX8-60 manual Connecting External Storage, IEEE1394 Port, Connecting IEEE1394 Device

ELX8 -60 INSTALLATION AND CONNECTION

14. Connecting External Storage

14.1. IEEE1394 Port

ELX8-60 has two IEEE1394 ports for external storage device interface. With them, ELX8-60 can expand storage capacity up to 4TB.

<Note>

Some IEEE1394 Bay may not be recognized by the ELX8 -60. Before purchasing, consult the local RUGGED CCTV distributor.

14.2. Connecting IEEE1394 Device

When using FireWire supported external HDD, hard drive bays can be connected to 1 port in the front panel or 1 port in the rear panel. The ELX8 -60 does not supply power to the hard drive bay; therefore only bays that use external power can be used.

<Note>

ELX8-60 detects external HDD, even though ELX8 -60 runs. If not, it is recommended to connect as follows.

1.Power off ELX8-60.

2.Connect external HDD to IEEE1394 port.

3.Power on external device.

4.Power on ELX8-60.

36 2003. 08. 13 (v 1.0) Rugged CCTV