Maxtor ELX8-60 manual When using Disk Farm

APPENDIX ELX8 -60

Installing & Expending External HDD (When using external HDD as

primary disk)

When using Disk Farm

The following description is when ELX8-60 does n’t have internal primary disk and 4 sets of IEEE1394 HDD.

(1)When external HDD farm is connected to IEEE1394 port, “Disk Manager” runs automatically. If not, run it manually in “MenuàUtility àDisk Manager”.

(2)Select a first HDD of [F] Ext. Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

<Note>

It is when ExtA is added as primary disk.

If connecting the device that is used in ELX8-60, type will be indicated as [V].

(3)Select a second HDD of [F] Ext. Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

(4)Select a third HDD of [F] Ext . Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

(5)Select a fourth HDD of [F] Ext . Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

(6)Select a first HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then [*] is changed to [R].

(7)Select a second HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then [*]

Rugged CCTV 2003. 08. 13 (v 1.0) 57