Maxtor ELX8-60 manual Running OSD menu, Using menu

ELX8 -60 INSTALLATION AND CONNECTION

5. Running OSD menu

5.1. Using menu

Press the [MENU] button to open the OSD Configuration Menu.

(1)Main Menu

(2)Sub-menu

(3) Setting Page

(4)Help message

(1)Main Menu Tabs: The select ed tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [￿ ￿ / ￿ ￿ ] arrow buttons. To move to a sub-menu, press the [ENTER] or [￿] buttons.

(2)Sub-menu : The select ed sub -menu is shown in blue and the related setting page will be shown to the right of the sub-menu. Use the [￿/￿] arrow button s to move within the sub-menu list. To move to the setting page press the [ENTER] button. To exit the setting page, press the [EXIT] button.

(3)Setting Page : The select ed item is shown in gray. To move within each page, use the [ ￿ ￿ / ￿ ￿ ] or [￿/￿] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value is a word, a dialogue box to edit the word will open. When setting value is a number, it should be set with using the [ ￿ ￿ / ￿ ￿ ] or [￿/￿] arrow buttons. After the value is set, press the [EXIT] button. To exit the Setting Page, press the [EXIT] button.

(4)Help message : Related information for each menu/setting will be displayed here.

14 2003. 08. 13 (v 1.0) Rugged CCTV